Fuel Injector Mechanism
Show/hide table
| |
| 图 1 | g01192221 |
|
喷油器（典型示例） (1) 调整螺钉 (2) 摇臂组件 (3) 弹簧 (4) 推杆 (5) 缸盖 (6) 挺杆 (7) 凸轮轴 | |
力由凸轮轴 (7) 上的喷油器的凸尖传递过来。 力输送经过挺杆 (6) 到达推杆 (4)。 力再从推杆 (4)，经由摇臂 (2) 传递到喷油器泵的顶端。 调节螺钉 (1) 允许进行喷射器间隙设定。 有关正确设定值，请参阅 测试与调整, "喷油器调整"。
Caterpillar Information System:
3512 and 3516 EUI Engines for Caterpillar Built Machines Electronic Control Circuit for the Fuel System
3512B Marine Auxiliary Engine Monitoring System
3608 Engine Internal Lubrication
3608 Engine Lubrication Metering Pump - Remove and Install
3508B Engine for Caterpillar Built Machines Pressure Sensor for Turbocharger Compressor Outlet
3508B Engine for Caterpillar Built Machines Pressure Sensor for Turbocharger Compressor Inlet
3508B Engine for Caterpillar Built Machines Fuel Injector Timing
3508B Engine for Caterpillar Built Machines User Defined Shutdown Input
C-12 Truck Engine General Information
3508B Engine for Caterpillar Built Machines Atmospheric Pressure Sensor
3508B Engine for Caterpillar Built Machines Engine Speed/Timing Sensor
3508B Engine for Caterpillar Built Machines Permanent Timing Calibration Sensor
3508B Engine for Caterpillar Built Machines Electronic Fuel Injector
3500B and 3500B High Displacement Generator Set Engines Air Inlet and Exhaust System Operation
2000/02/01 A New Sensor Housing In Prelubrication Lines Groups (Continuous Prelube) Provides Improved Operation {1319}
3500B and 3500B High Displacement Generator Set Engines Aftercooler
3508B Engine for Caterpillar Built Machines Turbocharger
3500B and 3500B High Displacement Generator Set Engines Valve Mechanism
2000/01/01 Torque Increased for Nuts on Fuel Injector Wiring Harness {1290}
3608 Engine Priority Valve
3500B and 3500B High Displacement Generator Set Engines Cylinder Block, Liners and Heads
3512 and 3516 EUI Engines for Caterpillar Built Machines Pistons, Rings and Connecting Rods - Two-Piece Piston
Uninterruptible Power Supply (UPS) 250 Component Location
3500B and 3500B High Displacement Generator Set Engines Electrical System Operation