325C Excavator 3126B Engine Supplement Caterpillar


Radiator - Install - Engine in Chassis

Usage:

325C AMH

安装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     138-7573     连杆支架     2    



    图 1g00862446

  1. 将工具 (A) 和适当的起吊设备固定到散热器 (4) 上。 散热器 (4) 的重量约为 46 kg (101 lb)。



    图 2g00862448

  1. 定位散热器 (4) 。

  1. 安装用于支撑散热器的螺栓 (5) 。



    图 3g00862445

  1. 连接下部散热器软管,然后拧紧卡箍 (3) 。



    图 4g00862444

  1. 连接溢流软管 (2) 。

  1. 连接上部散热器软管,然后拧紧卡箍 (1) 。

  1. 加注冷却系统。 有关散热器的容量,请参阅操作和保养手册, "加注容量" 。 冷却系统含有约为 30 L (8 美制加仑)的冷却液。

End By:

  1. 安装后冷器。 请参阅本手册中的 拆解和组装, "后冷器 - 拆卸和安装"。
  2. 安装风扇。 请参阅本手册中的 拆解和组装, "风扇 - 拆卸和安装"。

Caterpillar Information System:

314C CR Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
325C Excavator 3126B Engine Supplement Muffler - Remove and Install - Engine in Chassis
314C CR Excavator Hydraulic System Main Hydraulic Pump
2002/02/11 Guideline for Reusable Parts and Salvage Operations, SEBF8474 , "Caterpillar Hydraulic Hammers" is Available {6333}
325C Excavator 3126B Engine Supplement Radiator - Remove - Engine in Chassis
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit Low Power/Poor or No Response to Throttle
314C CR Excavator Machine System Specifications Main Hydraulic Pump
N3 Series Brushless Alternators General Information
314C CR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
322C Forest Machine Machine Systems Stick Cylinder - Install
Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059} Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059}
314C CR Excavator Machine System Specifications Final Drives and Travel Motors
312C, 315C, 318C, 319C, 320C, 322C, 325C and 330C Excavators Air Conditioning and Heating Troubleshooting Faults With Service Codes
N3 Series Brushless Alternators Component Description
305 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Travel Motor - Disassemble
5230B Excavator Machine Systems Pump Drive - Remove
314C CR Excavator Machine System Specifications Swing Motor
5230B Excavator Machine Systems Fan Motor (Radiator Cooling) - Install
C-9 Engine for the 973C Track-Type Loader CID 0091 FMI 02 Incorrect Throttle Switch inputs
312C, 315C, 318C, 319C, 320C, 322C, 325C and 330C Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Travel Motor - Assemble
C-9 Engine for the 12H Motor Grader CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
5230B Excavator Machine Systems Pump Drive - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.