Fuel System Primary Filter/Water Separator - Drain
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
Show/hide table
NOTICE |
---|
The water separator is not a filter. The water separator separates water from the fuel. The engine should never be allowed to run with the water separator more than half full. Engine damage may result. |
- Open drain (4). Catch the draining water in a suitable container. Dispose of the draining water properly.
- Close drain (4).
Show/hide table
Illustration 1 | g00799730 |
(1) Fuel filter base
(2) Quick release collar (3) Fuel filter (4) Drain valve for Fuel filter |
Show/hide table
NOTICE |
---|
The water separator is under suction during normal engine operation. Ensure that the drain valve is tightened securely to help prevent air from entering the fuel system. |
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft - Assemble - 3013, 3014, and 3024 Engines
3056E Industrial Engine Engine Oil Bypass Valve
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble - 3013, 3014 and 3024 Engines
3512B Marine Auxiliary Engines Turbocharger - Remove
C-15, C-16, and C-18 Engines Electronic Control System Components
3054, 3054B and 3056 Marine Engines Engine Oil Pump
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove - 3013, 3014 and 3024 Engines
3512B Marine Auxiliary Engines Fuel Filter Housing - Install
3512B Marine Auxiliary Engines Fuel Filter Housing - Remove
3512B Marine Auxiliary Engines Electronic Control Module (Engine) - Remove and Install
3056 Engine for Caterpillar Built Machines Connecting Rod Bearings - Remove
3512B Marine Auxiliary Engines Turbocharger - Install
C-15, C-16, and C-18 Truck Engines Engine Design
C-15, C-16, and C-18 Truck Engines Valve Mechanism Cover
3406E Truck Engine Compression Brake - If Equipped
3003, 3013, 3014 and 3024 Industrial Engines Fuel System - Prime
3406E Truck Engine Engine Oil Pan
C-15, C-16, and C-18 Truck Engines Cylinder Block
SR4 and SR4B Electric Power Generation Rewind Data Generator Identification
C-15 and C-16 Industrial Engines Cylinder Liner
C-15, C-16, and C-18 Truck Engines Front Housing and Covers
3512B Marine Auxiliary Engines Air Shutoff - Remove and Install