PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS
Usage:
TEBE0365-00
Show/hide table
| 05Feb2014 |
U-58
A-40
D-55
O-51
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS |
|
| 5056 | PS52607 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52607" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 28Feb2017 |
PROBLEM
Show/hide table
| The weld for the hydraulic tank can crack on certain 330D, 330DL, and 336DL Excavators. If the weld cracks, this can lead to oil leaks. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 330D L | MWP00181-03385 R2D00201-00284 |
| 336D L | J2F00151-00546 MDS00211-00346 W3K00201-01673 ZML00141-00477 |
| 336D L OEM | JRX00101-00357 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3953376 | TANK GP-HYD |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| If there are leaks from the hydraulic tank weld and cracks detected, replace the hydraulic tank with a new 395-3376 Hydraulic Tank Group. Refer to RENR8648, Disassembly and Assembly, for the remove and install procedure. Use clean equipment and follow contamination control procedures when draining, storing, and refilling the hydraulic oil. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
25-48 mo |
||||||
Show/hide table
| NOTE: This is a 8.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR FLUSHING HYDRAULIC SYSTEM AND TANK ON CERTAIN 307E MINI EXCAVATORS PRODUCT SUPPORT PROGRAM FOR FLUSHING HYDRAULIC SYSTEM AND TANK ON CERTAIN 307E MINI EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETIGHTENING THE COUNTERWEIGHT REMOVAL CYLINDER LOWER BRACKET BOLTS ON CERTAIN 374D AND 390D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETIGHTENING THE COUNTERWEIGHT REMOVAL CYLINDER LOWER BRACKET BOLTS ON CERTAIN 374D AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REBONDING THE RIGHT HAND SIDE POLYCARBONATE WINDOW IN THE CAB ON CERTAIN 385C, 374D, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REBONDING THE RIGHT HAND SIDE POLYCARBONATE WINDOW IN THE CAB ON CERTAIN 385C, 374D, AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CH65C/D, AND 95E CHALLENGER TRACTORS, 5110B, 5130, AND 5130B EXCAVATORS, AD30, AND AD45B UNDERGROUND ARTICULATED TRUCKS, R1600G, AND R1700G LOAD HAUL DUMP MACHINES, CIPI WHEEL TRAC PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CH65C/D, AND 95E CHALLENGER TRACTORS, 5110B, 5130, AND 5130B EXCAVATORS, AD30, AND AD45B UNDERGROUND ARTICULATED TRUCKS, R1600G, AND R1700G LOAD HAUL DUMP MACHINES, CIPI WHEEL TRAC
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPGRADING PRODUCT LINK SOFTWARE ON CERTAIN M313D, M315C, M315D, M316C, M316D, M318, M318C, M318D, M322C AND M322D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPGRADING PRODUCT LINK SOFTWARE ON CERTAIN M313D, M315C, M315D, M316C, M316D, M318, M318C, M318D, M322C AND M322D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 235C, 330, 330B, 330C, 330D, 336D, 336F, 345B, 345C, 349F, 350, 365B, 365C, 374D, 385B, 385C, 336E, 349E, 345D, AND 349D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 235C, 330, 330B, 330C, 330D, 336D, 336F, 345B, 345C, 349F, 350, 365B, 365C, 374D, 385B, 385C, 336E, 349E, 345D, AND 349D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320D, 324D, 325D, 330C, 330D, AND 568 FOREST MACHINES, 541 TRACK FELLER BUNCHERS, 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320D, 324D, 325D, 330C, 330D, AND 568 FOREST MACHINES, 541 TRACK FELLER BUNCHERS, 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 311C, 311D, 312, 312C, 312D, 314C, 314D, 315, 315B, 315C, 315D, 318C, 316E, 314E, 312E, AND 319D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 311C, 311D, 312, 312C, 312D, 314C, 314D, 315, 315B, 315C, 315D, 318C, 316E, 314E, 312E, AND 319D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 325, 325B, 325C, 325D, 328D, 329D, AND 329E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 325, 325B, 325C, 325D, 328D, 329D, AND 329E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR PRODUCT LINK SOFTWARE ON CERTAIN 325D, 329D, 330C, 345C, 349E, M325D, AND 330D MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR PRODUCT LINK SOFTWARE ON CERTAIN 325D, 329D, 330C, 345C, 349E, M325D, AND 330D MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REWORKING ENGINE LOW IDLE SPEED ON CERTAIN 306E AND 307E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING ENGINE LOW IDLE SPEED ON CERTAIN 306E AND 307E MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM SOFTWARE ON CERTAIN 312D GC, 312D2, 318D2, 320D GC, AND 320D2 EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM SOFTWARE ON CERTAIN 312D GC, 312D2, 318D2, 320D GC, AND 320D2 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 203-1921 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 203-1921 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 190-8558 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 190-8558 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 146-9039 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, AND M322D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 146-9039 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, AND M322D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-8922 HOSE ASSEMBLY ON CERTAIN M313D, M315D, AND M316D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-8922 HOSE ASSEMBLY ON CERTAIN M313D, M315D, AND M316D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE HYDRAULIC OIL RETURN HOSE ON CERTAIN 320E L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE HYDRAULIC OIL RETURN HOSE ON CERTAIN 320E L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CAB DOOR LOCK MECHANISM AND FASTENERS ON CERTAIN 365C, 374D, 385C, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING CAB DOOR LOCK MECHANISM AND FASTENERS ON CERTAIN 365C, 374D, 385C, AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 336EL EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 336EL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TEE ADAPTOR ON CERTAIN 320D FM HW EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TEE ADAPTOR ON CERTAIN 320D FM HW EXCAVATORS