PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 336EL EXCAVATORS
Usage:
TEBE0410-00
Show/hide table
| 23Sep2013 |
U-438
O-367
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER HOSE ON CERTAIN 336EL EXCAVATORS |
|
| 1063 1380 5057 | PS52517 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52517" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2015 |
PROBLEM
Show/hide table
| The existing aftercooler hose can fail on certain 336E L Excavators. If the aftercooler hose fails, it will cause an air leak. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 336E L | FJH00151-00199 YCE00234-00391 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3969448 | HOSE-AFCLR |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 5% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| If there are leaks from the aftercooler hose, replace the hose with a new 396-9448 Aftercooler Hose. Refer to Image1. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK FILTER SEAL ON CERTAIN 301.7D, 302.2D, AND 302.4D MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CAB DOOR LOCK MECHANISM AND FASTENERS ON CERTAIN 365C, 374D, 385C, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING CAB DOOR LOCK MECHANISM AND FASTENERS ON CERTAIN 365C, 374D, 385C, AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE HYDRAULIC OIL RETURN HOSE ON CERTAIN 320E L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE HYDRAULIC OIL RETURN HOSE ON CERTAIN 320E L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-8922 HOSE ASSEMBLY ON CERTAIN M313D, M315D, AND M316D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-8922 HOSE ASSEMBLY ON CERTAIN M313D, M315D, AND M316D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 146-9039 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, AND M322D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 146-9039 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, AND M322D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 190-8558 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 190-8558 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 203-1921 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 203-1921 HOSE ASSEMBLY ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM SOFTWARE ON CERTAIN 312D GC, 312D2, 318D2, 320D GC, AND 320D2 EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM SOFTWARE ON CERTAIN 312D GC, 312D2, 318D2, 320D GC, AND 320D2 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING ENGINE LOW IDLE SPEED ON CERTAIN 306E AND 307E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING ENGINE LOW IDLE SPEED ON CERTAIN 306E AND 307E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 330D, 330DL, AND 336DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR FLUSHING HYDRAULIC SYSTEM AND TANK ON CERTAIN 307E MINI EXCAVATORS PRODUCT SUPPORT PROGRAM FOR FLUSHING HYDRAULIC SYSTEM AND TANK ON CERTAIN 307E MINI EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETIGHTENING THE COUNTERWEIGHT REMOVAL CYLINDER LOWER BRACKET BOLTS ON CERTAIN 374D AND 390D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETIGHTENING THE COUNTERWEIGHT REMOVAL CYLINDER LOWER BRACKET BOLTS ON CERTAIN 374D AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER ROD ON CERTAIN GSH20B ORANGE PEEL GRAPPLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TEE ADAPTOR ON CERTAIN 320D FM HW EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TEE ADAPTOR ON CERTAIN 320D FM HW EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM GROUP ON CERTAIN 320D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM GROUP ON CERTAIN 320D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRODUCT LINK PL321 ON CERTAIN CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRODUCT LINK PL321 ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING DRIVE GROUP BOLTS ON CERTAIN 374D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING DRIVE GROUP BOLTS ON CERTAIN 374D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPROCKET BOLTS ON CERTAIN 330D, 336D, AND 336E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPROCKET BOLTS ON CERTAIN 330D, 336D, AND 336E EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LIFTING FILM ON CERTAIN 320D EXCAVATORS, EQUIPPED WITH THE SHOVEL CRANE DEMOLITION PACKAGE PRODUCT IMPROVEMENT PROGRAM FOR REPLACING LIFTING FILM ON CERTAIN 320D EXCAVATORS, EQUIPPED WITH THE SHOVEL CRANE DEMOLITION PACKAGE
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE SWING DRIVE FASTENING BOLT ON CERTAIN 349D AND 349E EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE SWING DRIVE FASTENING BOLT ON CERTAIN 349D AND 349E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 349E EXCAVATORS, 980K WHEEL LOADERS, 730C ARTICULATED TRUCKS, 621H, 623H, AND 627H WHEEL TRACTOR-SCRAPERS EQUIPPED WITH C13 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 349E EXCAVATORS, 980K WHEEL LOADERS, 730C ARTICULATED TRUCKS, 621H, 623H, AND 627H WHEEL TRACTOR-SCRAPERS EQUIPPED WITH C13 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRIC FUEL PRIMING PUMP ON CERTAIN 312D 2, 318D 2, AND 320D 2 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRIC FUEL PRIMING PUMP ON CERTAIN 312D 2, 318D 2, AND 320D 2 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 142-2736 PLATE ON CERTAIN M318D MH AND M322D MH WHEELED EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 142-2736 PLATE ON CERTAIN M318D MH AND M322D MH WHEELED EXCAVATORS