PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRIC FUEL PRIMING PUMP ON CERTAIN 312D 2, 318D 2, AND 320D 2 EXCAVATORS
Usage:
TEBE0514-00
Show/hide table
30Oct2013 |
U-533
D-442
O-446
Show/hide table
Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRIC FUEL PRIMING PUMP ON CERTAIN 312D 2, 318D 2, AND 320D 2 EXCAVATORS |
|
1261 | PS44069 |
Show/hide table
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44069" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
31Oct2015 |
PROBLEM
Show/hide table
The 386-0195 Electric Fuel Priming Pump may fail on certain 312D 2, 318D 2, and 320D 2 Excavators equipped with mechanical fuel injected engines. Failure of the priming pump results in white smoke and misfire due to low fuel pressure. |
AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
*******Group 1******* | |
320D 2 | TMF00192-00193 |
Show/hide table
*******Group 2******* | |
312D LC | MGJ00212 |
Show/hide table
*******Group 3******* | |
318D 2L | WGR00214-00244 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
*******Group 1******* | ||
4 | 3S2093 | STRAP-CABLE |
4 | 8T4224 | WASHER-HARD |
4 | 8T4908 | BOLT-HEX HEAD |
1 | 2999265 | PUMP GP-F PRM -D |
1 | 3005183 | RESISTOR AS-24V |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 31% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
*******Group 2******* | ||
4 | 3S2093 | STRAP-CABLE |
4 | 8T4224 | WASHER-HARD |
4 | 8T4908 | BOLT-HEX HEAD |
1 | 2999265 | PUMP GP-F PRM -D |
1 | 3005183 | RESISTOR AS-24V |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
*******Group 3******* | ||
4 | 3S2093 | STRAP-CABLE |
4 | 8T4224 | WASHER-HARD |
4 | 8T4908 | BOLT-HEX HEAD |
1 | 2999265 | PUMP GP-F PRM -D |
1 | 3005183 | RESISTOR AS-24V |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Show/hide table
Replace 386-0195 Electric Fuel Priming Pump with a 299-9265 Electric Fuel Priming Pump and a 300-5183 Resistor. Wiring harness modification and wiring harness also required. Refer to the attached Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table