Use FT2617 Bracket Assembly To Support Pumps When Removing Engine {1003}
Usage:
5130 (7TJ, 5ZL) 5130B (4CS) Mass Excavator and Front Shovel
Features/Benefits
-
- * Essential Tool
- * Used to provide additional support to pumps when removing or installing engine
- * Prevents potential damage to pump suction lines
- * Quick installation (requires only 3 bolts)
- * Easily made from common angle iron
- * Essential Tool
Specifications/Technical Information
- Overall size (L x H x W) - 450 x 280 x 50 mm (17.7 x 11.0 x 2.0 in)
- Angle iron size - 50.0 x 50.0 x 6.4 mm (2.00 x 2.00 x .25 in)
- Steel specification - SAE 1018
- Angle iron size - 50.0 x 50.0 x 6.4 mm (2.00 x 2.00 x .25 in)
Assembly drawing with dimensions
Item dimensions
Reference
Service Manual Module; SENR1467; 3508B Engine Disassembly and Assembly Supplement for 5130B Excavator
Caterpillar Information System:
1998/11/23 Larger Value Backup Resistors Are Used In Electronic Wiring Group To Limit PRV Solenoids For Main Pump And Swing Pump {1437}
1998/11/23 New Radio Requires Preventive Maintenance To Eliminate Battery Drain {7338}
1998/11/23 The Solenoid Valve Group Used For Low Flow Attachment Has Improved Performance {5051,5479}
1998/11/23 Be Sure Electronic Controllers Are Grounded At Machine Service Inspections {1408,1901,5702}
1998/11/23 New Check Valve Used For Refueling Pump {1295}
1998/11/23 New Seal Kits Prevent Hydraulic Cylinder Oil Leaks {5456,5457,5458}
1998/11/23 New Indicator Assembly In The Air Cleaner Group {1051,7452}
1998/11/23 The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23 Identification Of Fuel Injection Tube Assemblies {1252}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 New Cab Platform Mounts Improve Cab Support And Flexibility{7253}
1998/11/23 Change In Location And Size Of Crankshaft Counterweight Sequence Number {1231,1202}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/23 Use 149-2872 Tooth Pin Remover Group For Removing Pins From Small Bucket Teeth {6822}
1998/11/23 New 158-4991 Cat Mini Multi-Tool Now Available {1404}
1998/11/30 New Ignition Key Has Double Cut Edge {1553}
1998/11/30 A Special Instruction Is now Available To Install A New Cleaner Group And Precleaner {1051,1055}
1998/11/30 A Special Instruction Is now Available For Installing A Two-Way Pilot Valve {5496}
1998/11/30 A Special Instruction Is Now Available For Reinforcing Bottom Plates Of Stick Assemblies {6502}
1998/11/30 New Lowering Control Valve For Stick Cylinder lines Can Be Adjusted To Prevent Stick Flop {5067}