Unit Injector Sleeve - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 111-5051 | 扳手 | 1 |
开始:
- 拆下摇臂和摇臂轴。 请参阅拆解和组装, "摇臂和摇臂轴 - 拆卸"。
- 拆下单体喷油器。 请参阅拆解和组装, "单体喷油器 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将发动机冷却液排放到适当的容器中。 请参阅操作和保养手册, "润滑剂粘度和加注容量"。
- 将工具 (A) 安装到单体喷油器衬套 (1) 中。 拆下单体喷油器衬套。
Show/hide table
 | |
| 图 1 | g00555478 |
Show/hide table
 | |
| 图 2 | g00555505 |
- 将垫圈 (3) 和 O 形密封圈 (2) 从单体喷油器衬套 (1) 上拆下。
Show/hide table
 | |
| 图 3 | g00555510 |
Caterpillar Information System:
G3408 and G3412 Engines Air Starting Motor
Generator Set Control Panel for Switchgear Conversion Service Tools
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Assemble
Generator Set Control Panel for Switchgear Conversion Engine Shutdown
Generator Set Control Panel for Switchgear Conversion Engine Overspeed
Generator Set Control Panel for Switchgear Conversion Engine Overspeed - Adjust
G3606 and G3608 Engines Engine Oil Filter Housings - Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector - Install
Generator Set Control Panel for Switchgear Conversion Engine Control
SR4 HV and SR4B HV Generators Generator - Inspect
Generator Set Control Panel for Switchgear Conversion Fault Management
G3408 and G3412 Engines Alternator and Regulator
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
3612 and 3616 Engines Engine Oil Filter Housings - Disassemble
Generator Set Control Panel for Switchgear Conversion Warning Operation
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Electric Starting Motor
3612 and 3616 Engines Engine Oil Filter Housings - Assemble
Generator Set Control Panel for Switchgear Conversion Normal Mode
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
Generator Set Control Panel for Switchgear Conversion Harness Code Mode
3406E Truck Engines Electrical Ground Stud
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
3412E and C30 Marine Engines Information Plate
3054 Engine Valve Mechanism Cover