PRODUCT SUPPORT PROGRAM FOR REPLACING THE ULTRA HIGH DEMOLITION FORE BOOM ON CERTAIN 330C EXCAVATORS
Usage:
SEBE9385
November 4, 2005
U-350
O-290
Show/hide table
| After failure only |
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ULTRA HIGH DEMOLITION FORE BOOM ON CERTAIN 330C EXCAVATORS |
|
| 6535 |
PS51022
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
- November 30, 2007
PROBLEM
The ultra high demolition fore boom is cracking at the weld, between the bottom and side plates on certain 330C Excavators.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 330C | JNK188, 189, 191-198, 200-212, 214-223, 225-228, 230-234, 236-239, 241-244, 246-249, 251, 252, 254-260, 262-265, 268, 271, 273, 275, 278-280, 282, 283, 286-288, 291, 294, 295, 298, 299, 301-303, 305, 306, 314-317, 320, 322, 324, 325, 327, 328, 332, 309-312 |
PARTS NEEDED
Show/hide table
Qty |
Part Number |
Description |
| 4 | 1661498 | SEAL-LIP TYP |
| 1 | 2143050 | BOOM AS-BRG |
ACTION REQUIRED
- If the ultra high demolition fore boom is cracked, replace the fore boom. Refer to the Service Manual for your machine for the complete procedure on replacing the ultra high demolition fore boom.
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
0-24 mos |
|
|
|
|
|
|
|
25-36 mos |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE STICK ON CERTAIN 304 CR AND 305 CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE STICK ON CERTAIN 304 CR AND 305 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN O-RING ONTO THE FUEL PRESSURE REGULATOR VALVE ON CERTAIN 345C, 365C, AND 385C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN O-RING ONTO THE FUEL PRESSURE REGULATOR VALVE ON CERTAIN 345C, 365C, AND 385C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPOSITIONING THE HIGH PRESSURE WATER PUMP ON CERTAIN SF-200R AND SF-200RS COLD PLANERS PRODUCT IMPROVEMENT PROGRAM FOR REPOSITIONING THE HIGH PRESSURE WATER PUMP ON CERTAIN SF-200R AND SF-200RS COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW 250-5252 HANDRAIL ON CERTAIN 365B L, 365B L SERIES II EXCAVATORS AND 365B L SERIES II MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW 250-5252 HANDRAIL ON CERTAIN 365B L, 365B L SERIES II EXCAVATORS AND 365B L SERIES II MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING VARIOUS HYDRAULIC HOSES ON CERTAIN 312C, 315C, 318C, 319C, 320C, 322C, 325C, 325C L, 330C, AND 330C L EXCAVATORS AND M325C MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING VARIOUS HYDRAULIC HOSES ON CERTAIN 312C, 315C, 318C, 319C, 320C, 322C, 325C, 325C L, 330C, AND 330C L EXCAVATORS AND M325C MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE QUICK COUPLER OPERATION ON CERTAIN 304, 304.5, AND 305 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR IMPROVING THE QUICK COUPLER OPERATION ON CERTAIN 304, 304.5, AND 305 MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REPAIRING THE WELD ON THE BUCKET HINGE PLATE PIN BOSS ON CERTAIN 320C, 325C, AND 330C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM REPAIRING THE WELD ON THE BUCKET HINGE PLATE PIN BOSS ON CERTAIN 320C, 325C, AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 194-8321 ROD ASSEMBLY FOR THE STICK CYLINDER ON CERTAIN 325C AND 325C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 194-8321 ROD ASSEMBLY FOR THE STICK CYLINDER ON CERTAIN 325C AND 325C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR IMPROVING THE LEVELING CAPABILITY ON CERTAIN 320C EXCAVATORS THAT ARE EQUIPPED WITH HEAVY FRONT END COMPONENTS PRODUCT SUPPORT PROGRAM FOR IMPROVING THE LEVELING CAPABILITY ON CERTAIN 320C EXCAVATORS THAT ARE EQUIPPED WITH HEAVY FRONT END COMPONENTS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE SAFETY ALARM ON CERTAIN 325C L AND 330C L EXCAVATORS THAT ARE EQUIPPED WITH A PIN GRABBER PLUS QUICK COUPLER PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE SAFETY ALARM ON CERTAIN 325C L AND 330C L EXCAVATORS THAT ARE EQUIPPED WITH A PIN GRABBER PLUS QUICK COUPLER
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDERS ON CERTAIN BH27, BH30, AND BH30W BACKHOE LOADER WORK TOOLS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDERS ON CERTAIN BH27, BH30, AND BH30W BACKHOE LOADER WORK TOOLS
PRODUCT SUPPORT PROGRAM FOR REPLACING 221-8308 HOSES ON CERTAIN GSH15 GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING 221-8308 HOSES ON CERTAIN GSH15 GRAPPLES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOCK NUTS FOR THE BUCKET AND STICK CYLINDERS ON CERTAIN 312C, 312C L, 315C, AND 315C L HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VP30 FUEL PUMP ON CERTAIN 315C TRACKED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VP30 FUEL PUMP ON CERTAIN 315C TRACKED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MAIN PUMP COUPLING ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MAIN PUMP COUPLING ON CERTAIN M313C, M315C, M316C, M318C, AND M322C WHEELED HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON THE PRODUCT LINK 300 MODULE FOR CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR TORQUING THE SWING BEARING MOUNTING BOLTS ON CERTAIN 321C LCR EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR TORQUING THE SWING BEARING MOUNTING BOLTS ON CERTAIN 321C LCR EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REPLACING THE ROTATOR GROUP ON CERTAIN G320B AND VRG-30/2 GRAPPLES PRODUCT IMPROVEMENT PROGRAM REPLACING THE ROTATOR GROUP ON CERTAIN G320B AND VRG-30/2 GRAPPLES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MOUNTING BOLTS FOR THE COUNTERWEIGHT ON CERTAIN 345C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MOUNTING BOLTS FOR THE COUNTERWEIGHT ON CERTAIN 345C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HANDRAILS ON CERTAIN 345B SERIES II EXCAVATORS THAT ARE EQUIPPED WITH A WIDE HEAVY DUTY UNDERCARRIAGE IN ORDER TO IMPROVE ACCESS TO THE CAB AND ACCESS PLATFORM PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HANDRAILS ON CERTAIN 345B SERIES II EXCAVATORS THAT ARE EQUIPPED WITH A WIDE HEAVY DUTY UNDERCARRIAGE IN ORDER TO IMPROVE ACCESS TO THE CAB AND ACCESS PLATFORM
PRODUCT SUPPORT PROGRAM FOR INSPECTION AND REPAIR OF CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTION AND REPAIR OF CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAM PLATE FOR THE TRAVEL MOTOR ON CERTAIN 325C AND 330C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CAM PLATE FOR THE TRAVEL MOTOR ON CERTAIN 325C AND 330C EXCAVATORS