Usage:
July 30, 2005
U-256
O-210
Priority |
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 175-3244 PRESSURE SWITCH WITH A NEW PRESSURE SWITCH ON CERTAIN 325C, 330C, 345B L SERIES II, 365B L SERIES II, AND 385B L EXCAVATORS |
|
1435-PX, 5057 |
PI30828
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
COMPLETION DATE |
TERMINATION DATE |
January 31, 2006 | July 31, 2006 |
PROBLEM
THE 175-3244 Pressure Switch activating the free rotate function of the tool, may fail internally on certain 325C, 330C, 345B L SERIES II, 365B L SERIES II, and 385B L Excavators.AFFECTED PRODUCT
Model | Identification Number |
325C |
|
330C |
|
345BL Series II |
|
365B L Series II |
|
385B L |
|
PARTS NEEDED
Qty |
Part Number | Description |
1 |
|
SEAL-O-RING |
1 | 2665881 | SWITCH AS-PR |
ACTION REQUIRED
See the attached Rework Procedure.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.SERVICE CLAIM ALLOWANCES
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report |
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
(2-Rework Procedure)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 175-3244 PRESSURE SWITCH WITH A NEW PRESSURE SWITCH
MODELS INVOLVED - 325C, 330C, 345B L SERIES II, 365B L SERIES II, AND 385B L EXCAVATORS
Dear Caterpillar Product Owner:
A new 266-5881 Pressure Switch needs to be installed on the products listed below. The current 175-3244 Pressure Switch may fail. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated July 30, 2005 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to July 30, 2005 Service Letter
Rework Procedure
- Disconnect the wire for the 175-3244 Pressure Switch.
- Remove the 175-3244 Pressure Switch and clean the port.
- Install a new 266-5881 Pressure Switch and a new 3J-1907 Seal-O-Ring.
- Tighten the pressure switch to 35Nm +/- 3Nm.
- Connect the wire.