PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R2008 CYLINDER HEAD ASSEMBLIES FROM PARTS STOCK
Usage:
SEBE9135
April 6, 2005
U-111
A-82
D-93
O-98
Show/hide table
| Parts stock action only |
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 10R2008 CYLINDER HEAD ASSEMBLIES FROM PARTS STOCK |
|
| 7750 |
PI70099
|
|
TERMINATION DATE
July 31, 2005PROBLEM
A number of cylinder head assemblies have been incorrectly identified as 10R2008 units , these were produced between 17 Jan.2005 and 21 Feb.2005 and will be stamped up with date codes 17 05 E to 52 05 E . note. E denotes ERC Remanufacture. Grimbergen stock has been held , 31 off units are at dealers.ACTION REQUIRED
All of these units to be returned to Grimbergen for return to Cat Reman ERC at Shrewsbury UK for investigation.SERVICE CLAIM ALLOWANCES
Submit one claim for all 10R2008 Cylinder Heads removed from parts stock.PARTS DISPOSITION
Grimbergen Parts Depot Caterpillar Overseas S.A.
Warranty Claims Area / PI70099
Humbeeksesteenweg, 98
1850 Grimbergen, Belgium
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 199-4611 WASHER FOR THE FINAL DRIVE ON CERTAIN 385B, 385B L, AND 5090B EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 199-4611 WASHER FOR THE FINAL DRIVE ON CERTAIN 385B, 385B L, AND 5090B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 199-4611 WASHERS FROM DEALER STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 199-4611 WASHERS FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR RETIGHTENING THE SPROCKET BOLTS ON CERTAIN 315C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR RETIGHTENING THE SPROCKET BOLTS ON CERTAIN 315C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING SWINGFRAME CRACKS AT THE BOOM CYLINDER MOUNTS ON CERTAIN 5110B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPAIRING SWINGFRAME CRACKS AT THE BOOM CYLINDER MOUNTS ON CERTAIN 5110B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND ADJUSTING THE CARRIER ROLLER WHICH MAY BE MISALIGNED ON CERTAIN 365B L, 365B L SERIES II, 385B, 385B L, AND 5090B EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND ADJUSTING THE CARRIER ROLLER WHICH MAY BE MISALIGNED ON CERTAIN 365B L, 365B L SERIES II, 385B, 385B L, AND 5090B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING VARIOUS PLASTIC CAB PANELS ON CERTAIN 312C, 315C, AND 318C HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING VARIOUS PLASTIC CAB PANELS ON CERTAIN 312C, 315C, AND 318C HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 249-7123 STRUT FOR THE DOOR ON CERTAIN 320C, 322C, 325C, AND 330C FORESTRY EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 249-7123 STRUT FOR THE DOOR ON CERTAIN 320C, 322C, 325C, AND 330C FORESTRY EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GOVERNOR MOTOR THAT MAY FAIL ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C, AND 321C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE GOVERNOR MOTOR THAT MAY FAIL ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C, AND 321C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL AND IMPROVED CASE DRAIN LINES ON CERTAIN M300 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR CASE DRAIN LINES ON CERTAIN 330C AND 330C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR CASE DRAIN LINES ON CERTAIN 330C AND 330C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO PROVIDE DECALS AND A NEW OPERATION AND MAINTENANCE MANUAL FOR CERTAIN CATERPILLAR PIN GRABBER COUPLERS PRODUCT IMPROVEMENT PROGRAM TO PROVIDE DECALS AND A NEW OPERATION AND MAINTENANCE MANUAL FOR CERTAIN CATERPILLAR PIN GRABBER COUPLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING LINE RELIEF VALVES ON CERTAIN 345B AND 345B SERIES II HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING LINE RELIEF VALVES ON CERTAIN 345B AND 345B SERIES II HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE ON CERTAIN 315C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GOVERNOR MOTOR THAT MAY FAIL ON CERTAIN 311C, 312C, 314C, 318C, 319C, 320C, AND 321C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE GOVERNOR MOTOR THAT MAY FAIL ON CERTAIN 311C, 312C, 314C, 318C, 319C, 320C, AND 321C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING OR REPLACING THE RADIATOR CORES WHICH MAY LEAK ON CERTAIN 330C, 330C L EXCAVATORS AND 330C MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REPAIRING OR REPLACING THE RADIATOR CORES WHICH MAY LEAK ON CERTAIN 330C, 330C L EXCAVATORS AND 330C MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RETORQUEING DAMPER RETAINING BOLTS ON CERTAIN 3500 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 101-7404 BOLTS ON THE MAIN CONTROL VALVE ON CERTAIN 312C, 312C L, 315C, 318C, 319C, 320C, 320C LN, 322C, 325C, 325C L, 330C, AND 330C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 101-7404 BOLTS ON THE MAIN CONTROL VALVE ON CERTAIN 312C, 312C L, 315C, 318C, 319C, 320C, 320C LN, 322C, 325C, 325C L, 330C, AND 330C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR FAN MOTOR 209-6058 MOTOR GROUP WITH A NEW 247-8978 MOTOR GROUP ON CERTAIN 385B, 385B L, AND 5090B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR FAN MOTOR 209-6058 MOTOR GROUP WITH A NEW 247-8978 MOTOR GROUP ON CERTAIN 385B, 385B L, AND 5090B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 137-5159 AND 137-5160 HOSES ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 137-5159 AND 137-5160 HOSES ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROLLER FOR BOOM/BLADE SELECTION ON CERTAIN 312C L EXCAVATORS THAT ARE EQUIPPED WITH A BLADE PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROLLER FOR BOOM/BLADE SELECTION ON CERTAIN 312C L EXCAVATORS THAT ARE EQUIPPED WITH A BLADE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR