Engine Oil Cooler - Install
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 检查 O 形密封圈的状况。 必要时,更换密封件。
Show/hide table
图 1 g01019963 - 安装 O 形密封圈 (9)。 将机油冷却器底盖 ( 10) 定位在软管接头 ( 6) 中。
- 将 O 形密封圈安装在机油滤清器底座上。 将机油冷却器芯 (3) 定位在机油滤清器底座上。
- 安装螺栓 (8) 及垫圈以及螺栓 ( 7) 及垫圈。
- 安装螺栓 (4) 和垫圈。 拧紧软管卡箍 (5)。
- 将 O 形密封圈安装在机油冷却器的弯头组件 ( 1)上。
- 用甘油轻轻地润滑孔径。 将机油冷却器弯头定位在机油冷却器芯 ( 3) 上。
- 安装螺栓 (2) 和垫圈。
- 向冷却系统加注冷却液到正确的液位。 有关正确的的加注步骤,请参阅 操作和保养手册 。
Caterpillar Information System:
3406E On-Highway Engine Cylinder Head - Remove
3406C (PEEC III) Truck Engine Alternator
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Remove
3406E On-Highway Engine Turbocharger - Disassemble
3524B Engines for Off-Highway Trucks Engine Cranks but Will Not Start
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3116 and 3126 Marine Engines Engine Rating Definitions
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3306B Industrial Engine Valve Mechanism Cover - Remove and Install
3608 Engine Fuel Injection Control Linkage
3406E On-Highway Engine Turbocharger - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Remove
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406C Engines for Caterpillar Built Machines Service Meter
G3300 Engines Before Starting Engine
3176C and 3196 Engines For Caterpillar Built Machines Flywheel - Remove
G3300 Engines Starting the Engine
3406E On-Highway Engine Cylinder Head - Install
3176C and 3196 Industrial Engines Flywheel - Install
3612 and 3616 Engines Fuel Injector - Heavy Fuel Oil
3176C and 3196 Engines For Caterpillar Built Machines Flywheel Housing - Remove and Install
3406E On-Highway Engine Vibration Damper and Pulley - Remove and Install