Turbocharger - Disassemble
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position the turbocharger on a bench. Remove clamp (1) from waste gate.
Show/hide table
Illustration 2 g00513699 - Loosen the nuts on V-band clamps (3).
- Separate the compressor housing (2) and turbine housing (5) from turbocharger cartridge (4).
Show/hide table
NOTICE Do not attempt to disassemble the turbocharger cartridge assembly or wastegate. Do not remove the compreesor wheel. The turbocharger cartridge assembly and the wastegate are not field serviced, and should be replaced only as a unit.
- Check condition of all components. Use new parts to replace worn or damaged parts.
Show/hide table
| |
| Illustration 1 | g00513698 |
Caterpillar Information System:
3524B Engines for Off-Highway Trucks Engine Cranks but Will Not Start
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3116 and 3126 Marine Engines Engine Rating Definitions
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3306B Industrial Engine Valve Mechanism Cover - Remove and Install
3608 Engine Fuel Injection Control Linkage
3406E On-Highway Engine Turbocharger - Remove
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
G3300 Engines Gauges and Indicators
3116 and 3126 Marine Engines Model View Illustrations
3608 Engine Fuel Transfer Pump
3406E On-Highway Engine Electronic Unit Injector - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Remove
3406C (PEEC III) Truck Engine Alternator
3406E On-Highway Engine Cylinder Head - Remove
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Remove
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3406C Engines for Caterpillar Built Machines Service Meter
G3300 Engines Before Starting Engine
3176C and 3196 Engines For Caterpillar Built Machines Flywheel - Remove
G3300 Engines Starting the Engine
3406E On-Highway Engine Cylinder Head - Install