Turbocharger - Remove
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Illustration 1 | g01031556 |
- Remove tube assemblies (2) and (3) from turbocharger (1). Check the condition of the O-ring seals on tube assemblies (2) and (3). Use new parts for replacement if the O-ring seals are worn or damaged.
Show/hide table
Illustration 2 g01031557 - Attach a suitable lifting device to turbocharger (1).
- Remove bolts (4) and turbocharger (1). The weight of the turbocharger is approximately
34 kg ( 75 lb) .
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
G3300 Engines Gauges and Indicators
3116 and 3126 Marine Engines Model View Illustrations
3608 Engine Fuel Transfer Pump
3406E On-Highway Engine Electronic Unit Injector - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Filter Base - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Rocker Shaft - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Filter Base - Install
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Filter Base - Remove
3126 Truck Engine (Military) Cold Weather Lubricants
3304B and 3306B Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
3608 Engine Fuel Injection Control Linkage
3306B Industrial Engine Valve Mechanism Cover - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3116 and 3126 Marine Engines Engine Rating Definitions
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3524B Engines for Off-Highway Trucks Engine Cranks but Will Not Start
3406E On-Highway Engine Turbocharger - Disassemble
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Remove
3406C (PEEC III) Truck Engine Alternator
3406E On-Highway Engine Cylinder Head - Remove
3176C and 3196 Engines For Caterpillar Built Machines Engine Oil Cooler - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Remove