After Failure Only
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SEAT IN THE IMPLEMENT PUMP CONTROLLER ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS |
5455 |
PS51721 |
NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51721" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The 165-9407 Plug can loosen and cause the 2542034/">254-2034 Seat or 2537775/">253-7775 Seat to fail on certain M313D, M315D, M316D, M318D, M318D MH, M322D, and M322D MH Wheeled Excavators. If the existing seat fails it can result in poor hydraulic performance and control. |
Qty |
Part Number |
Description |
*******Group 1*******
|
1 |
2542031 |
PISTON |
1 |
2542033 |
PIN |
1 |
2542034 |
SEAT |
1 |
2542035 |
BUSHING |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
*******Group 2*******
|
1 |
2537772 |
PISTON |
1 |
2537774 |
PIN |
1 |
2537775 |
SEAT |
1 |
2537776 |
BUSHING |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
*******Group 3*******
|
1 |
2542031 |
PISTON |
1 |
2542033 |
PIN |
1 |
2542034 |
SEAT |
1 |
2542035 |
BUSHING |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 4% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
If the hydraulic performance is slow, jerky, and/or the hydraulic power feels low, inspect the components in the 276-0155 or 253-7766 Valve Group (the implement pump compensator valve) for damage. If any components show signs of damage, replace them with the appropriate group of parts listed above. Tighten the 165-9407 Plug to 100 Nm in order to prevent future loss of pre-load. Refer to the machines service manual as needed. |