Cat® Terrain v7 for Grading and Loading Caterpillar

Move Design Position

Usage:

- TER

To move the design while using the machine, the operator enables the Move Design function. The design can be moved horizontally, vertically, and rotated. This function enables the creation of design templates that may be sent to the machine to be positioned by the operator.

Only use this function for small designs that can be easily placed by the machine operator. The altered position of the design is stored in the file as an offset and is applied to the design whenever the file is opened.

Note: Files with this function cannot be used with older versions of the onboard software. The reference point to which the design is rotated can be set. If the reference point is not set, the point will be set by default. The point is set to the middle of the west end of the box surrounding the design.

Before a design can be moved into the onboard software, select the option in Cat MineStar that enables this feature in the design file.

Reference: Refer to Systems Operation, RENR9562, "Cat^® Terrain Office Software".

"Design File Move Enable" - Enables the Move Design option in the onboard software menu.

Note: By default this option is turned off and the option to "Move Design" is hidden.

"Allow All Design File Moves" - Allows all files to be moved.

Note: Each file has a permission flag. This flag is like the change offset flag that allows operators to move a design. This setting will allow all files, including old designs, to be moved.

Caterpillar Information System:

Cat® Terrain v7 for Grading and Loading Plane and TIN Design Files

Cat® Terrain v7 for Grading and Loading File Transfer from Office to Machine

Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D9T Track Type Tractor Indicators

Cat® Terrain v7 for Grading and Loading Default Machine Configuration

Pump Compensator Valve Performance May Reduce on Certain Wheel Loaders {5455} Pump Compensator Valve Performance May Reduce on Certain Wheel Loaders {5455}

New VIMS Configuration File is Now Available for Certain R3000H Load Haul Dumps {7601} New VIMS Configuration File is Now Available for Certain R3000H Load Haul Dumps {7601}

Instructions for Installing New Fuel Pump on Certain Compact Track Loaders and Skid Steer Loaders {1256, 1263, 1274} Instructions for Installing New Fuel Pump on Certain Compact Track Loaders and Skid Steer Loaders {1256, 1263, 1274}

Procedure To Install A New Fuel Pump Kit For Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {1256} Procedure To Install A New Fuel Pump Kit For Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {1256}

Instructions for Installing New Fuel Pump on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1256, 1260, 1274} Instructions for Installing New Fuel Pump on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1256, 1260, 1274}

An Improved Engine Mount is Now Used on Certain Wheel Feller Bunchers {1152, 1153, 1154} An Improved Engine Mount is Now Used on Certain Wheel Feller Bunchers {1152, 1153, 1154}

Fuel Tank Filler Cap May Break Through Padlock Hole On Certain 426F2 Backhoe Loaders {1273} Fuel Tank Filler Cap May Break Through Padlock Hole On Certain 426F2 Backhoe Loaders {1273}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}

Cat® Terrain v7 for Grading and Loading VBM, DIG and TSS Files for Material Grade Design

Cat® Terrain v7 for Grading and Loading Materials Windows

PM310, PM312, and PM313 Cold Planer Water Spray System

Cat® Terrain v7 for Grading and Loading Avoidance Zone

Installation Procedure for Tire Pressure Monitoring Kit for 844K, 854K Wheel Dozers and 990K, 992K, and 994K Wheel Loaders {1408, 7490, 7494} Installation Procedure for Tire Pressure Monitoring Kit for 844K, 854K Wheel Dozers and 990K, 992K, and 994K Wheel Loaders {1408, 7490, 7494}

PM310, PM312, and PM313 Cold Planer Additional Messages

Cat® Terrain v7 for Grading and Loading Information from Receiver - Position Accuracy

Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D9T Track Type Tractor Before Operation

Cat® Terrain v7 for Grading and Loading Master Configuration File

Cat® Terrain v7 for Grading and Loading As-Built Surfaces

Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D9T Track Type Tractor Operation

Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D9T Track Type Tractor Stopping the Machine