Advanced Display on the Electronic Control Module Can Go Blank on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7490, 7494, 7601, 7603, 7610, 7620} Caterpillar

Compact Track Loader

239D (S/N: CD41-UP; BL91-UP)

249D (S/N: AH91-UP; GWR1-UP)

259D (S/N: FTK1-UP; GTK1-UP; FTL1-UP)

279D (S/N: GTL1-UP; PPT1-UP; RCX1-UP)

289D (S/N: WCT1-UP; TAW1-UP)

299D2 (S/N: FD21-UP; BY41-UP)

299D2 XHP (S/N: DX21-UP)

Multi Terrain Loader

257D (S/N: FMR1-UP; EZW1-UP)

277D (S/N: FMT1-UP)

287D (S/N: TLK1-UP; HMT1-UP)

297D2 (S/N: BL71-UP)

297D2 XHP (S/N: HP21-UP)

Skid Steer Loader

226D (S/N: HRD1-UP)

232D (S/N: KXC1-UP; DPR1-UP)

236D (S/N: SEN1-UP; MPW1-UP; BGZ1-UP)

242D (S/N: DML1-UP; DZT1-UP; A9W1-UP)

246D (S/N: BYF1-UP; JSL1-UP; HMR1-UP)

262D (S/N: DTB1-UP; KTS1-UP; LST1-UP)

272D2 (S/N: BL21-UP)

272D2 XHP (S/N: MD21-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

Advanced display on the electronic control module can go blank on the machines listed above.

Solution

Show/hide table

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.

Illustration 1	g06330786
Display of 514-2367 Electronic Control Module

In the event the display goes blank, reboot the display by pushing the first and last keys simultaneously for 10 to 15 seconds. Refer to Illustration 1.

Note: Rebooting the display should be done prior to replacement of the display.