Transmission Component Locations
Transmission Hydraulic Control
Illustration 1 | g06185037 |
The transmission hydraulic control is located in the transmission housing above the transmission planetary.
Refer to Systems Operation, "Transmission Hydraulic Control" for additional information.
Illustration 2 | g06185700 |
The transmission planetary is located in the transmission housing behind the torque converter.
Refer to Systems Operation, "Transmission Planetary" for additional information.
Modulating Valve (Transmission Hydraulic Control)
Illustration 3 | g06185106 |
The six modulating valves for the transmission hydraulic control are on the transmission hydraulic control.
Refer to Systems Operation, "Modulating Valve (Transmission Hydraulic Control)" for additional information.
Solenoid - Transmission Control
Illustration 4 | g06186121 |
The six solenoid valves for the transmission control are on the modulating valves for the transmission hydraulic control within the transmission housing.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Illustration 5 | g06185134 |
The main relief valve for the transmission hydraulic pressure is on the transmission hydraulic control.
Refer to Systems Operation, "Power Train System" for additional information.
Illustration 6 | g06185624 |
The Transmission oil filter is on the left-hand side of the machine behind the rear tire.
Refer to Systems Operation, "Oil Filter (Transmission)" for additional information.
Temperature Sensor - Transmission Oil
Illustration 7 | g06186064 |
The temperature sensor for the transmission oil is on a tube assembly on the right-hand side of the transmission.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Illustration 8 | g06234490 |
The oil cooler for the power train is on the right side of the engine and behind the right front wheel.
Refer to Systems Operation, "Oil Cooler (Power Train)" for additional information.
Torque Converter Component Locations
Illustration 9 | g06184885 |
The torque converter is located between the engine and the transmission in the torque converter housing.
Refer to Systems Operation, "Torque Converter" for additional information.
Illustration 10 | g06235616 |
The gear pump for the power train oil is on the left side of the torque converter.
Refer to Systems Operation, "Gear Pump (Power Train)" for additional information.
Modulating Valve (Torque Converter Lockup Clutch)
Illustration 11 | g06185163 |
The modulating valve for the torque converter lockup clutch is under the housing of the torque converter at the top of the unit.
Refer to Systems Operation, "Modulating Valve (Torque Converter Lockup Clutch)" for additional information.
Illustration 12 | g06251878 |
The Torque Converter oil filter is on the left-hand side of the machine in front of the torque converter oil tank and behind the front tire.
Refer to Systems Operation, "Oil Filter (Torque Converter)" for additional information.
Magnetic Screen (Torque Converter)
Illustration 13 | g06185674 |
The magnetic screen for the torque converter oil is located in the torque converter housing on the left-hand side of the torque converter.
Refer to Systems Operation, "Magnetic Screen (Torque Converter)" for additional information.
Temperature Sensor - Torque Converter Oil
Illustration 14 | g06186309 |
The temperature sensor for the torque converter oil is on the right side of the torque converter housing.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Oil Level Sensor - Torque Converter
Illustration 15 | g06185864 |
The torque converter oil level sensor is at the bottom rear of the torque converter housing.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Cab Component and ECM Locations
Illustration 16 | g06185944 |
The Chassis ECM is at the rear of the cab behind the cover panel. (The Chassis ECM is the center unit of the three modules.)
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Illustration 17 | g06185947 |
The Transmission ECM is at the rear of the cab behind the cover panel. (The Transmission ECM is the right unit of the three modules.)
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Illustration 18 | g06185962 |
The transmission control is located in the cab in the console to the right-hand side of the seat.
Refer to Systems Operation, "Power Train System" for additional information.
Final Drive Component Locations
Illustration 19 | g06185890 |
The differential and bevel gear area located in the rear axle housing.
Refer to Systems Operation, "Differential And Bevel Gear" for additional information.
Illustration 20 | g06185904 |
The final drives are on the outside of each wheel group.
Refer to Systems Operation, "Final Drive" for additional information.
Temperature Sensor - Final Drive
Illustration 21 | g06186356 |
The temperature sensors for the final drive oil are on the right side of the truck behind the hydraulic oil tank.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Speed Sensor - Transmission Input
Illustration 22 | g06186325 |
The speed sensor for the transmission input is on the front of the transmission housing.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Speed Sensor - Transmission Intermediate
Illustration 23 | g06186084 |
The transmission intermediate speed sensor is on the right-hand side of the transmission planetary within the transmission housing.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.
Speed Sensor - Transmission Output
Illustration 24 | g06186075 |
The two transmission output speed sensors are at the rear of the transmission.
Refer to Systems Operation, "Electronic Control (Power Train System)" for additional information.