Start By:
- Remove the drift reduction valve.
- Remove O-ring seals (1).
Show/hide table
Illustration 2 g06106496 - Remove relief valve (2).
Show/hide table
Illustration 3 g06106501 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove O-ring seals (3), (4), (6), and (8).
- Remove rings (5) and (7).
Show/hide table
Illustration 4 g06106512 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: Mark cover (10) for assembly purposes. Make sure that the internal notch faces down.
- Remove (9) and cover (10).
Show/hide table
Illustration 5 g06106554 - Remove O-ring seal (11) and back up ring (12).
- Remove spring (14) and check valve (13).
Show/hide table
Illustration 6 g06106572 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (15).
Show/hide table
Illustration 7 g06106575 - Remove spring (18), guide (17), and spool (16).
- Remove O-ring seal (19).
Illustration 1 | g06106487 |