R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Location of Components (Brake System)

Usage:

R1700K KT4

Components of the Brake System

  • Hydraulic Tank

  • Brake, Pilot, and Fan Pump

  • Brake, Pilot, Fan Oil Filter

  • Brake Accumulator Charging Valve

  • Brake Control Valves

  • Brake Accumulator Pressure Sensor

  • Parking Brake Control Valve

  • Brake Accumulators

  • Service Brake Control Valve

  • Service Brake Pedal

  • Parking Brake Switch

  • Parking Brake Oil Pressure Sensor

  • Service and Parking Brakes

  • Transmission ECM

Hydraulic Oil Tank



Illustration 1g06107345

The hydraulic tank is on the right side of the machine.

Brake, Pilot, Fan Pump



Illustration 2g06128091

The brake, pilot, and fan piston pump are mounted on the right-hand side of the machine above the rear axle.

Brake, Pilot, Fan Oil Filter



Illustration 3g06127559

The pilot and brake oil filter is located in front of the hydraulic tank in the hydraulic tank bay.

Brake Accumulator Charging Valve



Illustration 4g06128092

The brake accumulator charging valve is located below the hydraulic tank.

Brake Control Valves



Illustration 5g06128090

The brake control valves are located in the hydraulic tank compartment.

Brake Accumulator Oil Pressure Sensor



Illustration 6g06149623

The brake oil pressure sensor is on the side of the brake accumulator charge valve.

Parking Brake Control Valve



Illustration 7g06107924

The parking brake control valve is located below the fan pump on the right side of the machine, under the operator platform.

Brake Accumulators



Illustration 8g06107903

The brake accumulators are located in the hydraulic tank bay.

Service Brake Control Valve



Illustration 9g06128095

The service brake control valve is located under the cab on the left-hand side of the machine.

Service Brake Pedal



Illustration 10g06128093

Service brake pedal is located in the cab.

Parking Brake Switch



Illustration 11g06107915

The parking brake switch is on the console to right of the operators seat.

Service Brakes



Illustration 12g06149618

There are four service brakes two on each axle assembly. The wheels have been removed for clarity.

Parking Brake Oil Pressure Sensor



Illustration 13g06269024

The parking brake oil pressure sensor is on the side of the parking brake valve on the left side of the machine.

Transmission ECMs



Illustration 14g06108500

Transmission ECM is located inside the ECM enclosure beside the cab.

Caterpillar Information System:

M315F and M317F Wheeled Excavators Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
558 Forestry Machine Machine Systems Drift Reduction Valve (Boom) - Assemble
558 Forestry Machine Machine Systems Drift Reduction Valve (Boom) - Disassemble
M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701} M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Eccentric Weight - Assemble - Versa Vibe
C15 and C18 Engines for Caterpillar Built Machines Sensor Supply - Test
793F Tier IV Off-Highway Truck Field Assembly Guards - Install - Fuel Tank
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Eccentric Weight - Disassemble - Versa Vib
Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817} Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817}
563D and 573D Wheel Feller Bunchers Machine Systems Bank Valve (Main Hydraulic)
Cat Autolube System for Medium Wheel Loaders Automatic Lubrication System Troubleshooting
563D and 573D Wheel Feller Bunchers Machine Systems Breaker Relief Valve (Hydraulic Tank)
994K Wheel Loader Engine Supplement Fuel Tank - Remove and Install - 12 - Hour Tank
New Cross Slope Rotation Sensor Mounting Brackets and Collar Are Now Used on Certain Motor Graders {1408} New Cross Slope Rotation Sensor Mounting Brackets and Collar Are Now Used on Certain Motor Graders {1408}
New Power Train Software Is Now Available on Certain 797F Large Off-Highway Trucks {4800, 4808, 7610, 7620} New Power Train Software Is Now Available on Certain 797F Large Off-Highway Trucks {4800, 4808, 7610, 7620}
New Machine Software (Chassis) Is Now Available on Certain Large Off-Highway Trucks {7490, 7610, 7620} New Machine Software (Chassis) Is Now Available on Certain Large Off-Highway Trucks {7490, 7610, 7620}
Cat® Compaction Control for Landfill Compactors Display Description
563D and 573D Wheel Feller Buncher Maintenance Interval Schedule
M318F, M320F and M322F Wheeled Excavators and MH3022, MH3024 and MH3026 Material Handlers Fuses - Replace
M315D2 and M317D2 Wheeled Excavators Braking System - Check
Procedure to Inspect the Frame of 773E Off-Highway Trucks {0374, 0679, 7051} Procedure to Inspect the Frame of 773E Off-Highway Trucks {0374, 0679, 7051}
Circuit Breaker for Alternator Group May Fail on Certain M325D Material Handlers {1417} Circuit Breaker for Alternator Group May Fail on Certain M325D Material Handlers {1417}
Procedure to Inspect the Frame of 777D Off-Highway Trucks {7050, 7050, 7051, 7051} Procedure to Inspect the Frame of 777D Off-Highway Trucks {7050, 7050, 7051, 7051}
<B>New higher capacity wheel bearings now available for certain 14M/ 14M2/ 14M3 Motor Graders</B> {4215} <B>New higher capacity wheel bearings now available for certain 14M/ 14M2/ 14M3 Motor Graders</B> {4215}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.