Removal Procedure
Show/hide table
Table 1
Required Tools |
Tool |
Part Number |
Part Description |
Qty |
A |
422-5476 |
Lifting Eye Assembly |
3 |
Start By:
- Connect the steering frame lock.
- Release the hydraulic system pressure.
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.
Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
NOTICE |
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life. |
|
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and helps to keep contaminants from entering the system.
Show/hide table
|
|
|
Illustration 1 | g06107319 |
Show/hide table
|
|
|
Illustration 2 | g06107320 |
Show/hide table
|
|
|
Illustration 3 | g06107321 |
Show/hide table
|
|
|
Illustration 4 | g06166527 |
Show/hide table
|
|
|
Illustration 5 | g06107324 |
Show/hide table
|
|
|
Illustration 6 | g06166528 |
Show/hide table
|
|
|
Illustration 7 | g06107326 |
Installation Procedure
- Install the fuel tank in the reverse order of removal.