Exhaust Manifold
Show/hide table
 | |
| Illustration 1 | g00290417 |
(1) Tighten the bolts to the following torque. ... 240 ± 40 N·m (175 ± 30 lb ft)
(2) Tighten the bolts to the following torque. ... 105 ± 20 N·m (75 ± 15 lb ft)
(3) Tighten the v-band clamp to the following torque. ... 15 N·m (11 lb ft)
Note: When the v-band clamp is disassembled, do not remove the nut from the stud assembly. Release the v-band clamp by using the claw and stud assembly.
Caterpillar Information System:
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Sensors and Electrical Components
3618 Engine Cylinder Block
G3606 and G3608 Engines Gas Engine Ignition
3176B Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
G3612 and G3616 Engines Electronic Control (Combustion Sensor)
3406E Truck Engines General Information
3618 Engine Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
SPS342 Skid Mounted Pumper Fuel System - Prime
3612 and 3616 Engines Valve Mechanism
G3606 and G3608 Engines Air Lines - Choke
3406E Truck Engine Atmospheric Pressure Sensor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Reference Material
G3606 and G3608 Engines Exhaust Manifold
3612 and 3616 Engines Pressure Regulating Valve
G3300 Engines Before Starting Engine
Gas Engine Driven Chiller Driveline General Hazard Information
G3300 Engines Engine Stopping
3618 Engine Crankshaft
G3612 and G3616 Engines Piston and Rings
3600 Heavy Fuel Engines Engine Lifting
3612 and 3616 Engines Manual Barring Group - 50:1 Reduction
793B Off-Highway Truck Before Operation
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines Abbreviations and Symbols
G3612 and G3616 Engines Ignition Systems