Oscillating Axle (Rear)
Show/hide table
| |
| Illustration 1 | g06046015 |
Show/hide table
| Specification for 477-9947 Rear Axle Ar | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 367-6272 Trunnion Support | Inside bore of support trunnion is |
| 2 | 22 | 160-8510 Self-Locking Bolt | Torque to |
| 3 | 16 | 160-8510 Self-Locking Bolt | Torque to |
| 4 | 4 | 1K-6853 Pressure Relief Fitting | Apply Loctite 536 Low Break Loose PST to the threads prior to assembly. |
| Torque to |
|||
| 5 | 1 | 164-4156 Cover | Apply Loctite 518 to mating surface as a continuous bead prior to assembly. |
| 6 | 8 | 334-6836 Bolt | Torque to |
| 7 | 2 | 9S-4181 Plug | Lubricate threads with the fluid to be sealed prior to assembly. |
| Torque to |
|||
| 8 | 2 | 354-6758 Speed Sensor Gp (TRACTION CONTROL) | - |
| 9 | 4 | 178-2992 Bolt | Torque to |
| 10 | 1 | 367-6271 Trunnion Support | Inside diameter of the support trunnion is |
| 11 | 1 | 119-4258 Bearing Retainer | Apply Loctite 518 to mating surface as a continuous bead prior to assembly. |
| 12 | 4 | 6M-1622 Dowel | Apply Loctite C5-A to the dowels and frame bores prior to assembly. Do not allow Loctite C5-A on flat mounting surfaces. |
| 13 | 3 | 9M-6097 O-Ring Seal | Lubricate with the fluid to be sealed prior to assembly. |
| 14 | 2 | 220-6043 Bushing | Outside diameter of Bushing is |
| Inside diameter of Bushing is |
|||
| 15 | 16 | 160-8510 Self-Locking Bolt | Torque to |
| 16 | 1 | 5P-4484 Magnetic Plug | Torque to |
| Lubricate threads with the fluid to be sealed prior to assembly. | |||
Caterpillar Information System:
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders Maintenance Interval Schedule
SE50 V Asphalt Screed Screed Control System
MH3037 Material Handler Safety Messages
MH3037 Material Handler Declaration of Conformity
Installing the 473-2822 Auxiliary Lines Kit {5057} Installing the 473-2822 Auxiliary Lines Kit {5057}
New Clips are Now Used in the Oil Cooler Lines Group on Certain 773G and 775G Off-Highway Trucks {1374, 5057} New Clips are Now Used in the Oil Cooler Lines Group on Certain 773G and 775G Off-Highway Trucks {1374, 5057}
New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053} New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053}
Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303} Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303}
558 Forest Machine Safety Messages
A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320} A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000} Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201} A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201}
New Installation Kits are now Available for Cat® Fleet Onboard and Cat® Detect Proximity Awareness {7605, 7610, 7620} New Installation Kits are now Available for Cat® Fleet Onboard and Cat® Detect Proximity Awareness {7605, 7610, 7620}
14M3 Motor Grader Engine Supplement Clean Emissions Module - Remove and Install
MH3037 Material Handler Engine Supplement Refrigerant Compressor - Remove and Install
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (First Stage) - Test - Case Drain Flow for Piston Motor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (Second Stage) - Test - Case Drain Flow for Piston Motor
14M3 Motor Grader Machine Systems Piston Pump (Hydraulic and Steering) - Remove and Install
14M3 Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove and Install
Managing Cylinder Block Pitting Near the Upper Liner Seal In Certain 3500 Engines {1201, 1353, 135C, 1361, 1395} Managing Cylinder Block Pitting Near the Upper Liner Seal In Certain 3500 Engines {1201, 1353, 135C, 1361, 1395}
C7 and C9 Industrial Engines Air Inlet Heater Circuit - Test
14M3 Motor Grader Engine Supplement Engine and Transmission - Separate
14M3 Motor Grader Engine Supplement Engine and Transmission - Connect
A New Transmission Case is Now Used on Certain 770G Off-Highway Trucks {3030, 3064, 3160} A New Transmission Case is Now Used on Certain 770G Off-Highway Trucks {3030, 3064, 3160}