Maintenance Interval Schedule
Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.
Blade Frame - Adjust
Bucket Cutting Edges - Inspect/Replace
Bucket Tips - Inspect/Replace
Cab Air Filter - Clean/Replace
Circuit Breakers and Fuses - Reset/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Fuel System Priming Pump - Operate
Fuel Tank Cap - Clean
Fuel Tank Water and Sediment - Drain
Lower Machine Frame - Clean
Oil Filter - Inspect
Track (Rubber) - Remove/Replace
Window Washer Reservoir - Fill
Window Wiper - Inspect/Replace
Windows - Clean
Backup Alarm - Test
Bogie and Idler - Inspect/Replace
Cooling System Level - Check
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Lift Arm and Cylinder Linkage - Lubricate
Quick Coupler - Inspect
Radiator Core - Clean
Seat Belt - Inspect
Sprocket Retaining Nuts - Check
Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
Track (Rubber) - Inspect/Adjust
Work Tool - Lubricate
Work Tool Mounting Bracket - Inspect
Hydraulic System Oil Filter - Replace
Engine Oil and Filter - Change
Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
Sprocket - Inspect
Sprocket Bearings - Lubricate
Sprocket Bearings - Lubricate
Hydraulic System Oil - Change
The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.
When Required
Battery or Battery Cable - Inspect/ReplaceBlade Frame - Adjust
Bucket Cutting Edges - Inspect/Replace
Bucket Tips - Inspect/Replace
Cab Air Filter - Clean/Replace
Circuit Breakers and Fuses - Reset/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Fuel System Priming Pump - Operate
Fuel Tank Cap - Clean
Fuel Tank Water and Sediment - Drain
Lower Machine Frame - Clean
Oil Filter - Inspect
Track (Rubber) - Remove/Replace
Window Washer Reservoir - Fill
Window Wiper - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Axle Bearings - LubricateBackup Alarm - Test
Bogie and Idler - Inspect/Replace
Cooling System Level - Check
Engine Oil Level - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Lift Arm and Cylinder Linkage - Lubricate
Quick Coupler - Inspect
Radiator Core - Clean
Seat Belt - Inspect
Sprocket Retaining Nuts - Check
Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
Track (Rubber) - Inspect/Adjust
Work Tool - Lubricate
Work Tool Mounting Bracket - Inspect
Every 125 Service Hours
Engine Oil Sample - ObtainEvery 250 Service Hours
Engine Oil Sample - ObtainEvery 250 Service Hours or Monthly
Belts - Inspect/Adjust/ReplaceEvery 500 Service Hours
Hydraulic System Oil Sample - ObtainEvery 500 Service Hours or 6 Months
Fuel System Primary Filter (Water Separator) Element - ReplaceHydraulic System Oil Filter - Replace
Every 500 Service Hours or 1 Year
Engine Oil and Filter - ChangeEngine Oil and Filter - Change
Every 1000 Service Hours
Engine Valve Lash - CheckEvery 1000 Service Hours or 6 Months
Engine Crankcase Breather - CleanRollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
Every 1000 Service Hours or 1 Year
Bogie and Idler Oil Level - CheckSprocket - Inspect
Sprocket Bearings - Lubricate
Sprocket Bearings - Lubricate
Every 2000 Service Hours
Refrigerant Dryer - ReplaceEvery 2000 Service Hours or 1 Year
Fuel Injection Timing - CheckHydraulic System Oil - Change
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - ReplaceEvery 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - ReplaceEvery 5000 Service Hours
Engine Crankcase Breather (Closed Circuit) - ReplaceEvery 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - AddEvery 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - ChangeCaterpillar Information System:
SE50 V Asphalt Screed Screed Control System
MH3037 Material Handler Safety Messages
MH3037 Material Handler Declaration of Conformity
Installing the 473-2822 Auxiliary Lines Kit {5057} Installing the 473-2822 Auxiliary Lines Kit {5057}
New Clips are Now Used in the Oil Cooler Lines Group on Certain 773G and 775G Off-Highway Trucks {1374, 5057} New Clips are Now Used in the Oil Cooler Lines Group on Certain 773G and 775G Off-Highway Trucks {1374, 5057}
New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053} New Turbochargers Are Now Used For C175 Engine In Certain 797F Off-Highway Trucks {1052, 1053}
Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303} Broken Roof Glass on Certain MH3022 and MH3024 Material Handlers and M300F Wheeled Excavators {7303}
558 Forest Machine Safety Messages
A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320} A New Cab Upgrade Kit And A New Air Conditioner Upgrade Kit Are Now Available For Certain Pipelayers {7301, 7320}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000} Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201} A New Head to Block Oil Feed Dowel Is Now Available for C175 Off Highway Truck Engines {1100, 1201}
Product Link For Generator Sets Parameters
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Oscillating Axle (Rear)
New Installation Kits are now Available for Cat® Fleet Onboard and Cat® Detect Proximity Awareness {7605, 7610, 7620} New Installation Kits are now Available for Cat® Fleet Onboard and Cat® Detect Proximity Awareness {7605, 7610, 7620}
14M3 Motor Grader Engine Supplement Clean Emissions Module - Remove and Install
MH3037 Material Handler Engine Supplement Refrigerant Compressor - Remove and Install
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (First Stage) - Test - Case Drain Flow for Piston Motor
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Conveyor (Second Stage) - Test - Case Drain Flow for Piston Motor
14M3 Motor Grader Machine Systems Piston Pump (Hydraulic and Steering) - Remove and Install
14M3 Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove and Install
Managing Cylinder Block Pitting Near the Upper Liner Seal In Certain 3500 Engines {1201, 1353, 135C, 1361, 1395} Managing Cylinder Block Pitting Near the Upper Liner Seal In Certain 3500 Engines {1201, 1353, 135C, 1361, 1395}
C7 and C9 Industrial Engines Air Inlet Heater Circuit - Test
14M3 Motor Grader Engine Supplement Engine and Transmission - Separate
14M3 Motor Grader Engine Supplement Engine and Transmission - Connect