Track
Show/hide table
| |
| Illustration 1 | g02725196 |
Show/hide table
| Specification for 383-4238 Track Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
| Use the following procedure to tighten the track bolts: | |||
| 1. Tighten the track bolts to |
|||
| 2. Tighten the standard track bolts to an extra turn of 120 ± 5 degrees. | |||
| 3. Tighten the master link bolts to an extra turn of 180 ± 5 degrees. | |||
| - | - | - | The maximum assembly force for the track link assembly is |
| - | - | - | The reference setting force is |
| A | - | - | Distance between the bolt holes is |
| B | - | - | Distance between the bolt holes is |
| C | - | - | Distance between the bolt holes is |
| D | - | - | Distance between the bolt holes is |
| E | - | - | Protrusion at one end of the pin is |
Show/hide table
| |
| Illustration 2 | g02725198 |
|
View of area F | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| G | - | - | Distance from the end of the plug (1) to the surface of the stopper (2) is |
| H | - | - | Distance from the end of the pin (3) to the surface of the stopper (2) is |
| - | - | - | The plug (1) must not be recessed below the surface of the stopper (2) after assembly. |
| End play for the link assemblies is |
Caterpillar Information System:
CW16 Pneumatic Compactor Propel System Brake Pedal - Test
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
CW34 Pneumatic Compactor Machine System Electrical Schematic (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Location of Components (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Operator Controls (Emulsion Spray System)
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
CW16 Pneumatic Compactor Propel System Brake - Calibrate
The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305} The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
CW16 Pneumatic Compactor Propel System Parking Brake - Test - Release Pressure
The Main Frame is Improved for the 785D Off-Highway Truck {0679, 7051} The Main Frame is Improved for the 785D Off-Highway Truck {0679, 7051}
CW34 Pneumatic Compactor Machine System Emulsion Spray System - General Information
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274} Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Operator Platform - Remove and Install
Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265} Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265}
CW16 Pneumatic Compactor Propel System Piston Pump (Propel) - Calibrate
A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154} A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154}
994K Large Wheel Loader Field Assembly Manual Bottom Guard - Install
Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059} Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059}
Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276} Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276}
Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579} Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579}