Emulsion Spray System - General Information
Show/hide table
| |
| 图 1 | g06023722 |
|
一般信息 | |
乳化液喷洒系统用于将液态轮胎处理溶液喷射到机器轮胎上。 根据，乳化液的选择和正确使用量随机器将要行驶的路面类型变化而变化。
乳化液喷洒系统包含电气部件和乳化液喷洒部件。 电气部分由选项 ECM、行驶操纵杆、保险丝、继电器、电动马达组成。 乳化液喷洒部件部分由乳化液罐、乳化液泵、喷洒杆、喷嘴组成。
Show/hide table
| |
| 图 2 | g06025568 |
|
(1) 机器 ECM
(2) 选项 ECM (3) 显示 (4) 行走操纵杆 (5) 乳化液泵继电器 (6) 乳化液泵马达 | |
机器 ECM (1) 监控来自显示屏 (3) 行驶操纵杆 (4) 的控制输入信号，以便确定乳化液喷洒控制系统的状态。
机器 ECM (1) 评估输入信号，并决定有无任何输出信号应发送至选项 ECM (2)。 选项 ECM 控制乳化液泵继电器 (5)。
注: 上图中的蓝色线表示输入信号。 红色线表示输出信号。 红色和蓝色线表示双向通信。
Caterpillar Information System:
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
CW16 Pneumatic Compactor Propel System Brake Pedal - Test
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
CW34 Pneumatic Compactor Machine System Electrical Schematic (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Location of Components (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Operator Controls (Emulsion Spray System)
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
CW16 Pneumatic Compactor Propel System Brake - Calibrate
The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305} The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
CW16 Pneumatic Compactor Propel System Parking Brake - Test - Release Pressure
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274} Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Operator Platform - Remove and Install
Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265} Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265}
CW16 Pneumatic Compactor Propel System Piston Pump (Propel) - Calibrate
A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154} A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154}
994K Large Wheel Loader Field Assembly Manual Bottom Guard - Install
Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059} Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059}
Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276} Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276}
Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579} Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579}
Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004} Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004}