Idlers (Track)
Show/hide table
| |
| Illustration 1 | g06025517 |
Show/hide table
| Specification for 383-4237 Front Idler Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 7H-7131 Pipe Plug | Before assembly, apply blue Loctite 243 to the threads.
Torque to |
| 2 | 2 | 482-9627 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Prior to assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The metal seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
| 3 | 2 | 099-0163 Pin | Install the pin with the slit in the range that is specified. The correct position of the pin is shown in view B-B. |
| C | - | - | Specified range is 30 degrees. |
| D | - | - | Angle from centerline of idler shaft is 15 degrees. |
| 4 | - | - | Prior to assembly, clean the surface to remove the protective coating. |
| 5 | 1 | 6I-6477 Idler Shaft | Install the idler shaft. Position the "R" that is stamped on the end face of the idler shaft backward into the front idler bearing. |
| - | - | - | End play in axial direction:
Minimum is Maximum is |
Caterpillar Information System:
CW34 Pneumatic Compactor Machine System Emulsion Spray System - General Information
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
CW16 Pneumatic Compactor Propel System Brake Pedal - Test
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
CW34 Pneumatic Compactor Machine System Electrical Schematic (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Location of Components (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Operator Controls (Emulsion Spray System)
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
CW16 Pneumatic Compactor Propel System Brake - Calibrate
The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305} The Assembly Procedure for the Wiper Motor Assembly has been Improved on Certain Motor Graders {7305}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274} Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274}
CB64B, CB66B, and CB68B Asphalt Compactors Machine Systems Operator Platform - Remove and Install
Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265} Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265}
CW16 Pneumatic Compactor Propel System Piston Pump (Propel) - Calibrate
A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154} A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154}
994K Large Wheel Loader Field Assembly Manual Bottom Guard - Install
Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059} Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059}
Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276} Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276}
Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579} Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579}
Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004} Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004}
Improved Alternator Mounting Bolt Now Used on R1700G Load Haul Dump Machines {1405} Improved Alternator Mounting Bolt Now Used on R1700G Load Haul Dump Machines {1405}