Operator Platform - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 422-5473 | 吊耳组件 | 4 |
- 将蓄电池断路开关转到断开位置。
Show/hide table
图 1 g06025703 - 断开线束组件 (1)。
Show/hide table
图 2 g06025716 - 松开螺栓 (2),然后断开线束组件。
Show/hide table
图 3 g06025721 - 拆下螺栓 (3),然后将夹子放在一边。
- 拆下螺栓 (4),然后将接地电缆放在一边。
Show/hide table
图 4 g06025736 - 打开门组件 (5)。
Show/hide table
图 5 g06025743 - 拆下螺栓 (6),然后将接地母线放在一边。
- 断开线束组件 (7)。
Show/hide table
图 6 g06025395 - 拆下螺钉 (9) 和存储门 (8)。
Show/hide table
图 7 g06025399 - 卸下螺钉 (10)。
Show/hide table
图 8 g06025403 - 拆下螺钉 (12) 和盖组件 (11)。
Show/hide table
图 9 g06025831 Show/hide table图 10 g06025842 Show/hide table图 11 g06025862 - 将工具 (A) 和适当的起吊设备安装到操作平台 (13)。 操作平台 (13) 的重量约为
1270 kg (2800 lb) 。 - 抬起地板垫 (14)。 拆下螺栓 (15) 和操作平台 (13)。
- 按与拆卸相反的顺序安装操作平台 (13)。
- 将螺栓 (6) 拧紧至扭矩为
30 ± 7 N·m (266 ± 62 lb in) 。 - 将螺栓 (4) 拧紧至扭矩为
30 ± 7 N·m (266 ± 62 lb in) 。
- 将螺栓 (6) 拧紧至扭矩为
Caterpillar Information System:
Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274} Installation Procedure for Upgrading the Low-Pressure Fuel System For Certain C175 Powered Off-Highway Trucks {1256, 1274}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
CW34 Pneumatic Compactor Machine System Emulsion Spray System - General Information
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
CW16 Pneumatic Compactor Propel System Brake Pedal - Test
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
CW34 Pneumatic Compactor Machine System Electrical Schematic (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Location of Components (Emulsion Spray System)
CW34 Pneumatic Compactor Machine System Operator Controls (Emulsion Spray System)
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
CW16 Pneumatic Compactor Propel System Brake - Calibrate
Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265} Brake Valve Orifice Connectors Are Now Used On Certain RM500B Rotary Mixers {4265}
CW16 Pneumatic Compactor Propel System Piston Pump (Propel) - Calibrate
A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154} A New Power Train Oil Gauge Assembly is Now Used on Certain 777G Off-Highway Trucks {3016, 3154}
994K Large Wheel Loader Field Assembly Manual Bottom Guard - Install
Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059} Installing the 498-6622 Debris Guard Kit on Compact Wheel Loaders, Skid Steers, and Multi Terrain Loaders {1052, 1059}
Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276} Procedure to Install the 498-6623 Debris Guard Kit on Certain Skid Steer Loaders, Multi Terrain Loaders, and Compact Track Loaders {7276}
Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579} Oil Change Intervals have Been Extended for Certain Components on 797 Off-Highway Trucks {0374, 5095, 7000, 7519, 7542, 7577, 7579}
Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004} Procedure to Install the Ride Control Solenoid Valve on Certain R1700G Load Haul Dump Machines {5004}
Improved Alternator Mounting Bolt Now Used on R1700G Load Haul Dump Machines {1405} Improved Alternator Mounting Bolt Now Used on R1700G Load Haul Dump Machines {1405}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
C9.3 Engine for Caterpillar Built Machines Crankshaft
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Lift)