Governor Drive
Show/hide table
Illustration 1 | g02710916 |
Show/hide table
Specification for 107-7897 Governor Drive Gp and 163-6112 Governor Drive Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 7K-6058 Bolt | Apply red Loctite 271 to the threads of bolts.
Torque to |
After the governor drive is assembled, fill the interior cavity with clean engine oil prior to the first start-up. |
Show/hide table
Illustration 2 | g02710917 |
Show/hide table
Specification for 107-7897 Governor Drive Gp and 163-6112 Governor Drive Gp | |||
Item | Qty | Part | Specification Description |
2 | - | - | Clean the face of the cover and the joint face of the housing with solvent. Apply blue Loctite High Flex GM to the joint face of the housing. Spread the sealant uniformly around the bolt holes. The cover must be assembled and the cover must be tightened within 10 minutes. |
3 | 1 | 4M-8303 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
4 | 1 | 6V-4314 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
5 | 1 | 1W-9639 Drive Shaft As | Diameter of the drive shaft assembly on bushing area is |
6 | 1 | 7N-5244 Bushing | Bore of the bushing is Align the oil hole of the bushing within ± 3 degrees of the oil hole in the housing. |
B | 1 | 1W-9640 Drive Shaft | Diameter of drive shaft on the bushing area is |
Show/hide table
Illustration 3 | g02710918 |
Show/hide table
Specification for 107-7897 Governor Drive Gp and 163-6112 Governor Drive Gp | |||
Item | Qty | Part | Specification Description |
7 | 3 | 7J-0204 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
8 | 1 | 3S-8313 Cup Plug | Apply Loctite 11358 to the threads.
Installation depth is |
9 | 1 | 6F-5897 Bushing | Bore of the bushing is Align the oil hole (10) of the bushing within ± 3 degrees of the oil hole in the housing. |
Show/hide table
Illustration 4 | g02710919 |
Show/hide table
Specification for 107-7897 Governor Drive Gp and 163-6112 Governor Drive Gp | |||
Item | Qty | Part | Specification Description |
11 | 3 | 7J-0204 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
12 | 2 | 8M-6521 Dowel | Extension of dowel (E) from drive housing is |
13 | 2 | 1W-9629 Drive Shaft | Diameter of drive shaft is |
14 | 1 | 3K-0360 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
H | 1 | 2S-1541 Jet Orifice | Extension of the jet orifice from the drive housing is |
Show/hide table
Illustration 5 | g02725248 |
Show/hide table
Specification for 107-7897 Governor Drive Gp and 163-6112 Governor Drive Gp | |||
Item | Qty | Part | Specification Description |
15 | 2 | 7C-1401 Bearing | Bore of the bearing is |
K | 1 | 1W-9631 Governor Drive Shaft | Diameter of governor drive shaft is |
L | 2 | 7C-1402 Bushing | Bore in the bushing is |
Caterpillar Information System:
G3500 A3 Engines Ignition Transformer
631E Series II Wheel Tractor-Scrapers General Coolant Information
3208 Marine Engine Engine Stopping
G3300 Engines Engine Starting
3512 Industrial Engine Fire Prevention and Explosion Prevention
3612 and 3616 Fast Vessel Engines Electrical System
3208 Marine Engine General Hazard Information
3208 Marine Engine Before Starting Engine
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
3306B Industrial Engine Engine Rating Definitions
345B Excavator and 345B Material Handler Machine System Specifications Stick Lines
3208 Marine Engine Mounting and Dismounting
3612 and 3616 Fast Vessel Engines Gauges and Indicators
G3406 Engines Exhaust Bypass Valve
G3406 Engines Flywheel
G3300 Engines Air Tank Moisture and Sediment - Drain
G3408C and G3412C Engines Piston and Rings - Gallery Cooled Piston
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
3612 and 3616 Fast Vessel Engines Aftercooler Core - Clean/Test
120H and 135H Motor Graders Mounting and Dismounting
G3300 Engines Air Starting Motor Lubricator Bowl - Clean
G3300 Engines Air Starting Motor Lubricator Oil Level - Check
345B Excavator Track Adjustment - Inspect
345B Excavator and 345B Material Handler Machine System Specifications Track Carrier Roller