Ignition Transformer
Show/hide table
| |
| Illustration 1 | g01288691 |
(1) Screw
- Torque ...
2.0 ± 0.5 N·m (18 ± 4 lb in)
Assemble spring (2) with the tab for positioning above the connector for the ignition harness.
(3) Transformer assembly
Spacer (4) must move freely after the terminal assembly has been torqued to the specified value.
Extension (5) must be pressed into the transformer assembly before the terminal assembly is installed. During each removal of the transformer, inspect the seal at the bottom of the extension. If the seal is dry or if the seal is cracked, replace the seal.
(6) Terminal assembly
- Torque ...
2.70 ± 0.25 N·m (24 ± 2 lb in)
Use a 132-8263 Spanner Wrench in order to tighten the terminal assembly.
Caterpillar Information System:
631E Series II Wheel Tractor-Scrapers General Coolant Information
3208 Marine Engine Engine Stopping
G3300 Engines Engine Starting
3512 Industrial Engine Fire Prevention and Explosion Prevention
3612 and 3616 Fast Vessel Engines Electrical System
3208 Marine Engine General Hazard Information
3208 Marine Engine Before Starting Engine
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
3306B Industrial Engine Engine Rating Definitions
345B Excavator and 345B Material Handler Machine System Specifications Stick Lines
3208 Marine Engine Mounting and Dismounting
G3300 Engines Radiator - Clean
G3408 and G3412 Engines Governor Drive
3612 and 3616 Fast Vessel Engines Gauges and Indicators
G3406 Engines Exhaust Bypass Valve
G3406 Engines Flywheel
G3300 Engines Air Tank Moisture and Sediment - Drain
G3408C and G3412C Engines Piston and Rings - Gallery Cooled Piston
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
3612 and 3616 Fast Vessel Engines Aftercooler Core - Clean/Test
120H and 135H Motor Graders Mounting and Dismounting
G3300 Engines Air Starting Motor Lubricator Bowl - Clean
G3300 Engines Air Starting Motor Lubricator Oil Level - Check
345B Excavator Track Adjustment - Inspect