Flywheel
Show/hide table
 | |
| Illustration 1 | g00270122 |
Typical example | |
For the procedure to inspect the flywheel, refer to Systems Operation/Testing and Adjusting, "Flywheel - Inspect".
(1) Bolt
-
Lubricate the bolt threads with engine oil.
- Torque ... 270 ± 27 N·m (200 ± 20 lb ft)
(2) Ring gear
-
Install the flywheel ring gear with the chamfer on the teeth in the direction which is shown in Illustration 1.
- Maximum temperature for installation of the ring gear ... 315 °C (599 °F)
Caterpillar Information System:
G3406 Engines Exhaust Bypass Valve
3612 and 3616 Fast Vessel Engines Gauges and Indicators
G3408 and G3412 Engines Governor Drive
G3500 A3 Engines Ignition Transformer
631E Series II Wheel Tractor-Scrapers General Coolant Information
3208 Marine Engine Engine Stopping
G3300 Engines Engine Starting
3512 Industrial Engine Fire Prevention and Explosion Prevention
3612 and 3616 Fast Vessel Engines Electrical System
3208 Marine Engine General Hazard Information
3208 Marine Engine Before Starting Engine
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
G3300 Engines Air Tank Moisture and Sediment - Drain
G3408C and G3412C Engines Piston and Rings - Gallery Cooled Piston
345B Excavator and 345B Material Handler Machine System Specifications Grease Lines
3612 and 3616 Fast Vessel Engines Aftercooler Core - Clean/Test
120H and 135H Motor Graders Mounting and Dismounting
G3300 Engines Air Starting Motor Lubricator Bowl - Clean
G3300 Engines Air Starting Motor Lubricator Oil Level - Check
345B Excavator Track Adjustment - Inspect
345B Excavator and 345B Material Handler Machine System Specifications Track Carrier Roller
3612 and 3616 Fast Vessel Engines Air Starting Motor Lines Screen - Clean
3612 and 3616 Fast Vessel Engines Barring Device - Lubricate
345B Excavator Machine System Specifications Track Roller Mounting