Water Pump
Show/hide table
| |
| Illustration 1 | g06000490 |
Show/hide table
| Specification for 349-6213 Water Pump Gp | |||
| Item | Qty | Part | Specification Description |
| B | 1 | 336-2212 Water Pump Seal As | Installation height of the seal is |
| 1 | 1 | 229-5469 Bearing Locknut | Torque to Use the following procedure in order to tighten the set screws of locknut : 1. Tighten the set screws in 180 degrees pattern to 2. Again, tighten the set screws in 180 degrees pattern to |
| 2 | 1 | 258-8726 Pump Shaft | Diameter of the pump shaft for impeller is |
| Lubricate the shaft lightly with clean engine oil before pressing the impeller on the pump shaft. | |||
| During assembly, pump shaft must be flush with the face of the impeller within ± |
|||
| 3 | 1 | 235-4643 Water Pump Seal | During assembly, Install the water pump seal dry into the pump housing. Install the water pump seal within 2 minutes after the water pump seal has been removed from the tube. Use the correct installation tool. Do not use hand pressure to install water pump seal. |
| 4 | 1 | 4N-1230 O-Ring Seal | Lubricate with P-80 or 5P-3975 Rubber Lubricant. |
| C | - | - | Distance between the impeller and the pump housing is |
Caterpillar Information System:
AP300F and AP355F Asphalt Pavers Machine Electrical System System Schematic
New Bracket Assemblies Are Now Available For Certain Skid Steer Loaders {5059, 5705} New Bracket Assemblies Are Now Available For Certain Skid Steer Loaders {5059, 5705}
795F AC and 795F AC XQ Off-Highway Trucks Suspension Cylinder - Check
New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429} New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Software - Install
Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620} Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620}
A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050} A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050}
AP655F and AP655F L Asphalt Paver Machine Systems Air Cleaner
797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check
AP600F Asphalt Paver Propel System Operator Controls (Propel System)
New Software is Available for Certain C4.4 Engines {1920} New Software is Available for Certain C4.4 Engines {1920}
3500E Marine Engines Fuel Injector Mechanism
AP500F Asphalt Paver Monitoring System
PL72 Pipelayer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} PL72 Pipelayer TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
AP555F Asphalt Paver Operator Controls
Procedure for Installing a New Steering Control Valve on 16M Motor Graders {4307, 4322} Procedure for Installing a New Steering Control Valve on 16M Motor Graders {4307, 4322}
AP600F Asphalt Paver Propel System Location of Electrical Components (Propel System)
New Speed Sensor Gp Is Now Used On Certain 777G Off-Highway Trucks {1408, 1439, 1907, 1912, 3141, 3160, 3175, 4803, 7493} New Speed Sensor Gp Is Now Used On Certain 777G Off-Highway Trucks {1408, 1439, 1907, 1912, 3141, 3160, 3175, 4803, 7493}
AP500F Asphalt Paver Push Roller
Lubrication Improvements Have Been Made to the Transmissions on Certain 797 Off-Highway Trucks {3160, 3182} Lubrication Improvements Have Been Made to the Transmissions on Certain 797 Off-Highway Trucks {3160, 3182}
A Guard for the Fluid Level Sensors is Now Used on the Service Center Groups (If Equipped) on Certain 793F Off-Highway Trucks {1408, 7513} A Guard for the Fluid Level Sensors is Now Used on the Service Center Groups (If Equipped) on Certain 793F Off-Highway Trucks {1408, 7513}
AP500F Asphalt Paver Shipping the Machine
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160} New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
AP500F Asphalt Paver Conveyor Drive Chains (Drag) - Adjust