New Software is Available for Certain C4.4 Engines {1920}
- Industrial Engine
- C4.4 (S/N: JKT1-7,9-9,11-11,13-18,20-546,548-620)
Certain machines are seeing instances where the E1389 (2) Aftertreatment #1 SCR Operator Inducement Severity: High - moderate severity (2) is active.
New engine software has been introduced. The new engine software ensures that when the engine is started during the first 25 hours of operation, the engine will operate correctly. The inducement Safe Harbour Mode will not be triggered.
Flash the engine Electronic Control Module (ECM) with the latest available software that can be found in SIS Web.
Refer to Troubleshooting, ECM Software - Install for the correct procedure.
Caterpillar Information System:
3500E Marine Engines Fuel Injector Mechanism
New Software is Available for Certain C4.4 Machine Engines {7610, 7620} New Software is Available for Certain C4.4 Machine Engines {7610, 7620}
AP600F Asphalt Paver Propel System General Information (Propel System)
Load Haul Dump Power Train Speed Sensor (Torque Converter Output)
Improved Cab Door Weld Procedure Now Used on R3000H Load Haul Dump Machines {7301} Improved Cab Door Weld Procedure Now Used on R3000H Load Haul Dump Machines {7301}
Deployment and Commissioning Procedure For Cat® Detect Proximity Awareness {7605, 7610, 7620} Deployment and Commissioning Procedure For Cat® Detect Proximity Awareness {7605, 7610, 7620}
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Assemble
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Disassemble
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Remove and Install
Cat® Detect for Object Detection Rear Coverage Creates False Blockage Events on Certain 777F, and 777G Off-Highway Trucks {7347, 7348} Cat® Detect for Object Detection Rear Coverage Creates False Blockage Events on Certain 777F, and 777G Off-Highway Trucks {7347, 7348}
New Hoses in the Steering System Are Now Used on Certain 24M Motor Graders {4304} New Hoses in the Steering System Are Now Used on Certain 24M Motor Graders {4304}
New Engine Software is Used on Certain Backhoe Loaders {7610, 7620} New Engine Software is Used on Certain Backhoe Loaders {7610, 7620}
AP600F Asphalt Paver Propel System Operator Controls (Propel System)
797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check
AP655F and AP655F L Asphalt Paver Machine Systems Air Cleaner
A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050} A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050}
Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620} Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Software - Install
New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429} New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429}
795F AC and 795F AC XQ Off-Highway Trucks Suspension Cylinder - Check
New Bracket Assemblies Are Now Available For Certain Skid Steer Loaders {5059, 5705} New Bracket Assemblies Are Now Available For Certain Skid Steer Loaders {5059, 5705}
AP300F and AP355F Asphalt Pavers Machine Electrical System System Schematic
3516 Engines 994K Wheel Loader Water Pump
AP500F Asphalt Paver Monitoring System