Improved Cab Door Weld Procedure Now Used on R3000H Load Haul Dump Machines {7301}
- Load Haul Dump
- R3000H (S/N: RCM1-UP)
Description Of Change: An improved cab door weld procedure is now used. The improved cab door weld procedure removes a weld on the cab door to provide greater service life.
Adaptable To: The improved cab door weld procedure is effective in production with the following machines.
Show/hide table
| Machine | Effective With |
|---|---|
| R3000H | S/N:RCM146-UP |
Show/hide table
| |
| Illustration 1 | g06000214 |
| (1) Location of the improvement to 387-7085 Cab Door | |
The improved cab door weld procedure ensures that there is no weld at location (1).
Note: Do not weld at location (1).
Caterpillar Information System:
Deployment and Commissioning Procedure For Cat® Detect Proximity Awareness {7605, 7610, 7620} Deployment and Commissioning Procedure For Cat® Detect Proximity Awareness {7605, 7610, 7620}
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Assemble
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Disassemble
CW16 Pneumatic Compactor Machine Systems Axle (Rear) - Remove and Install
Cat® Detect for Object Detection Rear Coverage Creates False Blockage Events on Certain 777F, and 777G Off-Highway Trucks {7347, 7348} Cat® Detect for Object Detection Rear Coverage Creates False Blockage Events on Certain 777F, and 777G Off-Highway Trucks {7347, 7348}
New Hoses in the Steering System Are Now Used on Certain 24M Motor Graders {4304} New Hoses in the Steering System Are Now Used on Certain 24M Motor Graders {4304}
New Engine Software is Used on Certain Backhoe Loaders {7610, 7620} New Engine Software is Used on Certain Backhoe Loaders {7610, 7620}
Added Support Now Used for Radiator Hose {1087, 1380} Added Support Now Used for Radiator Hose {1087, 1380}
Installation of the 491-4424 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 5005, 5051, 5057, 5059, 5705, 7301, 7405, 7557} Installation of the 491-4424 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 5005, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
The F Series Pavers Software Contains a New Calibration Function Tow Point Valves {7620} The F Series Pavers Software Contains a New Calibration Function Tow Point Valves {7620}
The Power Inverter Cable Clamps Need to be Anti-Seized Upon Reassembly {0650, 1408, 4822} The Power Inverter Cable Clamps Need to be Anti-Seized Upon Reassembly {0650, 1408, 4822}
A New Crown Indicator is Now Available on AS4173 Asphalt Screeds {5639, 5641} A New Crown Indicator is Now Available on AS4173 Asphalt Screeds {5639, 5641}
Load Haul Dump Power Train Speed Sensor (Torque Converter Output)
AP600F Asphalt Paver Propel System General Information (Propel System)
New Software is Available for Certain C4.4 Machine Engines {7610, 7620} New Software is Available for Certain C4.4 Machine Engines {7610, 7620}
3500E Marine Engines Fuel Injector Mechanism
New Software is Available for Certain C4.4 Engines {1920} New Software is Available for Certain C4.4 Engines {1920}
AP600F Asphalt Paver Propel System Operator Controls (Propel System)
797 Off-Highway Truck Link and Rear Cylinder (Suspension) - Check
AP655F and AP655F L Asphalt Paver Machine Systems Air Cleaner
A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050} A New Thrust Washer in the Final Drive Oscillation Assembly is now Used on Certain 24M Motor Graders {4050}
Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620} Procedure for Installing and Configuring Cat® MineStar Onboard for Supervisor and Accessory Vehicles {7605, 7610, 7620}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Software - Install
New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429} New Reflectors Are Now Used on Certain 424B and 424B HD Backhoe Loaders {1429}