New Onboard Radio Wiring Group Now Available on CAT Command for Underground Equipped Machines {1408, 733T}
- Machine Control & Guidance Products
- COMMAND (S/N: MXY1-UP)
Description Of Change: A new 433-6827 Radio Wiring Gp is now available. The new 433-6827 Radio Wiring Gp introduces high pass radio frequency filters and improved interconnecting radio frequency cables.
Adaptable To: The new 433-6827 Radio Wiring Gp is available for CAT Command, Underground Equipped Machines.
For procedure to install the new 433-6827 Radio Wiring Gp, refer to Special Instruction, SEHS0602, "Procedure to Rework the On-board Radio on CAT Command on Underground Equipped Machines".
Caterpillar Information System:
CCS7 Combination Vibratory Compactors Machine Systems Metering Pump (Steering) - Remove and Install
MH3037 Material Handler Stopping the Engine
2015/07/20 New Clamps are now Used in the Water Lines Group on Certain 14M Motor Graders {1380}
2015/09/11 Improved Seals are Now Used in the Hoist Valve on Certain Off-Highway Trucks {5051}
SE34 V and SE34 VT Asphalt Screeds Maintenance Interval Schedule
794 AC Off-Highway Truck Field Assembly Films - Install
16M3 and 18M3 Motor Graders Information Display Diagnostic Capabilities
16M3 and 18M3 Motor Graders Information Display General Information
16M3 and 18M3 Motor Graders Information Display Service Tools
CCS7 Combination Vibratory Compactors Machine Systems Direction and Speed Control - Remove and Install
MH 3037 Material Handler Cab Riser Control
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Neutralizer Valve - Check and Adjust
773E Off-Highway Truck Hydraulic System Control Valve (Hoist)
CCS7 Combination Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Differential and Bevel Gear (Front and Rear) - Disassemble
C3.4B Engines ECM Software - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Rear Axle - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Machine System Front Suspension Cylinder - Remove and Install
415F2 Industrial Loader Maintenance Interval Schedule
740 GC, 740 Ejector, 745 Articulated Truck Power Train Speed Sensor (Transmission) - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Safety Messages
SE34 V and SE34 VT Asphalt Screeds Specifications
SE34 V and SE34 VT Asphalt Screeds Plate Locations and Film Locations
AP500F Asphalt Paver Propel System Relief Valve (Charge) - Test and Adjust - Left Propel