Safety Pin Assembly May Foul with Main Frame on Certain 424B Backhoe Loaders{6118, 6119}
- Backhoe Loader:
- 424B (S/N: JRC7810-UP; JRN1950-UP)
- 424B HD (S/N: JRY1020-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Reports have been received from the field that, the 132-6496 Pin As for safety strut is fouling with main frame on the machines listed above.
Solution
Caterpillar is aware of this problem, and is recommending the following Interim Corrective action.
Repair procedure
- Remove safety bracket mounting 132-6496 Pin As from 231-3643 Arm Gp-Lift .
- Place 9R-0109 Washer (1) (3mm) in between pin and safety bracket.
Show/hide table
Illustration 1 | g03851876 |
Show/hide table
Illustration 2 | g03851178 |
Detail view of A |
- Assemble pin (A) between the lift arm and lift cylinder. Secure pin using 6V-8144 Retaining Ring .
Show/hide table
Illustration 3 | g03851180 |
- Check for the ply between safety bracket and lift arm.
Show/hide table
Illustration 4 | g03851202 |
- Ensure safety bracket end not fouling with lift cylinder piston rod.
Show/hide table
Illustration 5 | g03851188 |
Caterpillar Information System:
AP500F Asphalt Paver Machine Systems Front Wheel Drive Manifold - Assemble
AP500F Asphalt Paver Machine Systems Front Wheel Drive Manifold - Disassemble
CCS9 Compactor Machine Systems Fuel Tank
PL72, PL83 and PL87 Pipelayers Data Link - Test
PL72, PL83 and PL87 Pipelayers Charging System - Test
PL72, PL83 and PL87 Pipelayers Transmission Clutch
PL72, PL83 and PL87 Pipelayers Transmission
PL72, PL83 and PL87 Pipelayers Steering System
PL72, PL83 and PL87 Pipelayers Implement System
3412E Engine for 773E Off-Highway Trucks Injector Solenoid - Test
MD6200 Rotary Drill Drill Operation
A New Heat Shield Assembly Is Used on Certain C13 Machine Engines {1067, 1073} A New Heat Shield Assembly Is Used on Certain C13 Machine Engines {1067, 1073}
C4.4 and C7.1 Engines Service Tool Features
Noise From the Rear Axle on Certain 424B Backhoe Loaders{3278, 3282} Noise From the Rear Axle on Certain 424B Backhoe Loaders{3278, 3282}
PL72 Pipelayers Power Train Steering Clutch and Brake Control Valve - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Planetary - Assemble
PL83 and PL87 Pipelayers Engine Supplement System Pressure - Release
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Fuel Tank and Mounting
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Fuel Lines
C4.4 and C7.1 Engines Service Tool Error Identifiers
CS54B, CS64B and CP54B Vibratory Soil Compactor Machine Systems Vandalism Guard
PL83 and PL87 Pipelayers Power Train Transmission and Bevel Gears - Remove and Install
2015/06/24 New O-Ring Seals in the Service Brake Group are Now Used on Certain 424B Backhoe Loaders {4251}
2015/06/24 New Gas Spring Assembly for the Cab Door Is Now Used on Certain 424B Backhoe Loaders {7308}