Serial Numbers will be used to identify engines, transmissions, and major attachments.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Product Identification Number (PIN)
Illustration 1 | g03743943 |
The Product Identification Number (PIN) is on the front left side of the frame. PIN plate (1) may have the following information:
Illustration 2 | g06098314 |
Manufacturer Name and Address ____________________
Model number (A)____________________
Product Identification Number (B)____________________
Month and Year of Manufacture Plate (If Required) (C)____________________
CE Plate (If Required) (D)____________________
Country of Origin Info Plate (If Required) (E)____________________
Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (C) above if required.
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 3 | g06094564 |
The Month and Year of Manufacture are on the PIN plate.
Manufacturer:
Caterpillar Inc.,100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:
Caterpillar Eurasia LLC75, Sadovnicheskaya Emb.
Moscow 115035, Russia
Illustration 4 | g01880193 |
This plate (if equipped) is positioned on the bottom left side of plate (1) for the PIN.
Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.
For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
- Engine Power Primary Engine (kW)____________________
- Engine Power for Additional Engine (If Equipped) ____________________
- Typical Machine Operating Weight for European Market (kg)____________________
- Year of Construction____________________
- Machine Type ____________________
For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.
Illustration 5 | g01424505 |
(2) Dump Body Serial Number ____________________
Illustration 6 | g01424512 |
(3) Transmission Serial Number____________________
Illustration 7 | g01424517 |
(4) Engine Serial Number____________________
The following information is stamped on the component.
Illustration 8 | g01424569 |
(5) Torque Converter Serial Number____________________
Differential Sequence Number____________________
Wheel Station Sequence Number____________________
Illustration 9 | g06380856 |
(6) Pump Electronics Tank Unit Serial Number____________________
Illustration 10 | g06380850 |
(7) Clean Emission Module Serial Number____________________
This certification plate is located outside the cab on the right side of the ROPS.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification. |
Illustration 11 | g01125202 |
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a body or a payload, should not exceed the mass on the certification plate.