Screed Control - Assemble
- 将喇叭组件 (19) 和螺母安装到熨平板控制组件 (1) 的前半部分。
- 将摇臂开关 (18)、两个垫圈和两个螺栓安装到熨平板控制组件 (1) 的前半部分。
- 将键盘模块 (17)、六个螺母和六个垫圈安装到熨平板控制组件 (1) 的前半部分。
- 将停止开关 (16) 安装到熨平板控制组件 (1) 的前半部分。
Show/hide table
图 2 g03698623 - 将线束组件 (15)、四个螺栓、八个垫圈和四个螺母安装到熨平板控制组件 (1) 的后半部分。
- 连接线束组件 (14)。
Show/hide table
图 3 g03698621 - 连接线束组件 (11)、 (12) 和 (13)。
Show/hide table
图 4 g03698619 - 连接线束组件 (9) 和 (10)。
Show/hide table
图 5 g03698618 - 连接线束组件 (6)、 (7) 和 (8)。
Show/hide table
图 6 g03698616 - 连接熨平板控制组件 (1) 的两半。
- 将 13 个螺栓 (5) 和 13 个垫圈安装到熨平板控制组件 (1) 上。
Show/hide table
图 7 g03698615 - 将线束组件 (4) 连接到控制总成 (2) 上。
Show/hide table
图 8 g03698614 Show/hide table图 9 g03698613 - 将控制总成 (2) 安装到熨平板控制组件 (1) 上。 安装四个螺栓 (3) 和四个垫圈。 拧紧四颗螺栓 (3) 至扭矩为
6 N·m (53 lb in) 。
Show/hide table
图 1 | g03698625 |
结束:
- 安装熨平板控制。 请参阅拆解和装配, "熨平板控制 - 拆卸和安装"。
Caterpillar Information System:
SE50 V Asphalt Screed Screed Control - Disassemble
M318F, M320F and M322F Wheeled Excavators Hydraulic System Axle (Steering Alignment) - Test and Adjust
C7.1 Industrial Engine Selective Catalytic Reduction Warning System
559C and 579C Knuckleboom Loaders Main Hydraulic System
C4.4 Industrial Engine Product Lifting - Aftertreatment Systems
C3.4B Engines Electronic Service Tools
2014/07/10 Plate on Long Blocks on C6.6 and C4.4 Machine Engines {1201}
C3.4B Engines for Caterpillar Built Machines Compression - Test
C3.4B Engines for Caterpillar Built Machines Cylinder Head - Inspect
C3.4B Engines for Caterpillar Built Machines Basic Engine
C3.4B Industrial Engine Diesel Exhaust Fluid Tank - Flush
C3.4B Industrial Engine Fluid Recommendations
M318F, M320F and M322F Wheeled Excavators Hydraulic System Accumulator (Wheel Brake Charge Pressure) - Test and Adjust
559C and 579C Knuckleboom Loaders Cycle Times - Test
Procedure to Install 457-7565 Kit - Cover (Hydraulic Cap Door) {7276, 7315} Procedure to Install 457-7565 Kit - Cover (Hydraulic Cap Door) {7276, 7315}
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Brake Disc Wear - Measure
M318F, M320F and M322F Wheeled Excavators Hydraulic System Brake Control Valve (Service) - Test and Adjust
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Exhaust Manifold - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Steering) - Test
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Diesel Particulate Filter - Remove and Install
966M and 972M Wheel Loaders Battery or Battery Cable - Clean/Inspect/Replace
AP500F, AP555F, AP600F, AP655F, AP655F L, AP1000F and AP1055F Asphalt Pavers and SE50 and SE60 Asphalt Screeds Calibration
C3.4B Engines for Caterpillar Built Machines DEF Dosing Control System
Cat® Command for Dozing, Operator Station General Information