Screed Control - Disassemble
开始:
- 拆下熨平板控制。 请参阅拆解和装配, "熨平板控制 - 拆卸和安装"。
- 将控制总成 (2) 从熨平板控制组件 (1) 上拆下。 翻转熨平板控制组件 (1),然后拆下四个螺栓 (3) 和四个垫圈。 将熨平板控制组件 (1) 放置在工作表面上,使控制总成 (2) 朝上。
Show/hide table
图 3 g03698615 - 将线束组件 (4) 从控制总成 (2) 上断开。 将控制总成 (2) 从熨平板控制组件 (1) 上拆下。
Show/hide table
图 4 g03698616 - 拆下 13 个螺栓 (5) 和 13 个垫圈,以便分开熨平板控制组件 (1) 的两半。
Show/hide table
图 5 g03698618 - 断开线束组件 (6)、 (7) 和 (8)。
Show/hide table
图 6 g03698619 - 断开线束组件 (9) 和 (10)。
Show/hide table
图 7 g03698621 - 断开线束组件 (11)、 (12) 和 (13)。
- 分开熨平板控制组件 (1) 的两半。
Show/hide table
图 8 g03698623 - 断开线束组件 (14)。
- 将四个螺栓、八个垫圈、四个螺母和线束组件 (15) 从熨平板控制组件 (1) 的后半部分拆下。
Show/hide table
图 9 g03698625 - 将停止开关 (16) 从熨平板控制组件 (1) 的前半部分拆下。
- 将六个螺母、六个垫圈和键盘模块 (17) 从熨平板控制组件 (1) 的前半部分拆下。
- 将两个螺栓、两个垫圈和摇臂开关 (18) 从熨平板控制组件 (1) 的前半部分拆下。
- 将螺母和喇叭组件 (19) 从熨平板控制组件 (1) 的前半部分拆下。
Show/hide table
图 1 | g03698613 |
Show/hide table
图 2 | g03698614 |
Caterpillar Information System:
M318F, M320F and M322F Wheeled Excavators Hydraulic System Axle (Steering Alignment) - Test and Adjust
C7.1 Industrial Engine Selective Catalytic Reduction Warning System
559C and 579C Knuckleboom Loaders Main Hydraulic System
C4.4 Industrial Engine Product Lifting - Aftertreatment Systems
C3.4B Engines Electronic Service Tools
2014/07/10 Plate on Long Blocks on C6.6 and C4.4 Machine Engines {1201}
C3.4B Engines for Caterpillar Built Machines Compression - Test
C3.4B Engines for Caterpillar Built Machines Cylinder Head - Inspect
C3.4B Engines for Caterpillar Built Machines Basic Engine
C3.4B Industrial Engine Diesel Exhaust Fluid Tank - Flush
C3.4B Industrial Engine Fluid Recommendations
C3.4B Industrial Engine Refill Capacities
SE50 V Asphalt Screed Screed Control - Assemble
M318F, M320F and M322F Wheeled Excavators Hydraulic System Accumulator (Wheel Brake Charge Pressure) - Test and Adjust
559C and 579C Knuckleboom Loaders Cycle Times - Test
Procedure to Install 457-7565 Kit - Cover (Hydraulic Cap Door) {7276, 7315} Procedure to Install 457-7565 Kit - Cover (Hydraulic Cap Door) {7276, 7315}
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Brake Disc Wear - Measure
M318F, M320F and M322F Wheeled Excavators Hydraulic System Brake Control Valve (Service) - Test and Adjust
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Exhaust Manifold - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Steering) - Test
735, 740 GC, 740 EJECTOR, 745 Articulated Trucks Engine Supplement Diesel Particulate Filter - Remove and Install
966M and 972M Wheel Loaders Battery or Battery Cable - Clean/Inspect/Replace
AP500F, AP555F, AP600F, AP655F, AP655F L, AP1000F and AP1055F Asphalt Pavers and SE50 and SE60 Asphalt Screeds Calibration
C3.4B Engines for Caterpillar Built Machines DEF Dosing Control System