Window - Front
Show/hide table
 | |
| Illustration 1 | g03691479 |
Front view | |
Show/hide table
| Specification for 425-1222 Front Window Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 370-7288 Window Wiper Arm As | The arm tension is 6.0 ± 0.5 N (1.3 ± 0.1 lb). |
| 2 | 2 | 7X-7729 Washer | As required, use the following washer to assure proper striker engagement to latch. Thickness is 3.0 mm (0.12 inch). |
| B | - | - | The distance of the wiper blade from the edge of the window in the park position is 981.3 ± 5.0 mm (38.63 ± 0.20 inch). |
Show/hide table
 | |
| Illustration 2 | g03691504 |
Detail view of area C 283-4738 Window Wiper Motor Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 3 | 2 | Nut | Torque to 38 ± 2 N·m (28 ± 1 lb ft). |
| 4 | 2 | 5C-7261 Nut | Use the following tightening procedure during wiper arm installation: 1. Tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in). 2. Wait for 0.5 hour minimum. 3. Again, tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in). |
| E | - | - | Wiping angle is 90 ± 2 degrees. |
Show/hide table
 | |
| Illustration 3 | g03691485 |
Detail view of area D 283-4739 Window Wiper Motor Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | 2 | Nut | Torque to 38 ± 2 N·m (28 ± 1 lb ft). |
| 6 | 2 | 5C-7261 Nut | Use the following tightening procedure during wiper arm installation: 1. Tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in). 2. Wait for 0.5 hour minimum. 3. Again, tighten the wiper arm nut to 23 ± 1 N·m (204 ± 9 lb in). |
| F | - | - | Wiping angle is 90 ± 2 degrees. |
Caterpillar Information System:
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab Window
C3.4B Industrial Engine Safety Messages
AP1000F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point)
AP1000F Asphalt Paver Machine Systems Control Valve (Auxiliary)
AP1000F Asphalt Paver Machine Systems Grade Control Mounting
2014/06/23 Procedure to Rework the Machine Automation System Wiring Harness on Certain R3000H Load Haul Dump Machines {1408}
R1700G Load Haul Dump Power Train Updrive Gears - Assemble
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Oil Contamination - Test
M318F, M320F and M322F Wheeled Excavators Hydraulic System Grapple Rotate Hydraulic System
M318F, M320F and M322F Wheeled Excavators and MH3022 and MH3024 Material Handlers Stopping the Engine
M318F, M320F and M322F Wheeled Excavators Hydraulic System Quick Coupler System
2014/06/26 A New Seal Assembly for the Differential and Bevel Gear Group Is Now Used on Certain 797 Off-Highway Trucks {3256, 3258, 3281, 7555}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Lift Cylinder
C3.4B Industrial Engine Burn Prevention
AP1000F Asphalt Paver Machine Systems Transverse Beam
C3.4B Industrial Engine Fire Prevention and Explosion Prevention
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Lift Cylinder
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Parking Brake
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Axle Oil Cooler)
2014/06/26 The Guard Assembly has been Improved for the 789D Off-Highway Truck {4220, 7252, 7256, 7256}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Final Drive, Brake and Wheel - Remove and Install
794 AC Off-Highway Truck Parking
AP1000F Asphalt Paver Machine Systems Oil Cooler Bypass Valve
2014/07/03 A New Retainer Updates the Wheel and Final Drive Arrangement on Certain Off-Highway Trucks {4001, 4001, 4201, 4251, 4267}