Hydraulic Oil Filter - Replace - Fill Filter and Gearbox Filter
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Show/hide table
Illustration 1 g06232994 - Remove gearbox filter (1)
- Install a new gearbox filter.
- Remove the fill filter (2).
- Remove the used fill filter and discard the used filter properly.
- Inspect the seal for the filter housing. Replace a damaged seal with a new seal. Wash the filter housing in clean nonflammable solvent.
- Install a new filter element. Install the filter housing.
- Start the engine and operate the engine at low idle. Check for leaks and make any necessary repairs.
- Check the oil level in the hydraulic tank. If necessary, add oil. For the proper procedure, refer to Operation and Maintenance Manual, "Hydraulic Tank Oil - Check".
Caterpillar Information System:
CAT MT4400D AC Off-Highway Truck Machine Systems Accumulator (Front Brake) - Remove and Install
CAT MT4400D AC Off-Highway Truck Machine Systems Accumulator (Steering) - Remove and Install
16M Series 3 and 18M Series 3 Motor Grader Electronic Control (Power Train System)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Calibrations (Cat ET)
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train Torque Converter (Freewheel Stator) (Lockup) - Assemble
2014/04/28 A New IQAN MD3 Software Is Now Used on Certain Track Feller Bunchers {1920, 7620}
C4.4 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C4.4 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C4.4 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
Procedure to Install STIC Lockout Control Limit Switch on R1600G, R1600H, and R1700G Load Haul Dump Machines{1435, 3034, 4343} Procedure to Install STIC Lockout Control Limit Switch on R1600G, R1600H, and R1700G Load Haul Dump Machines{1435, 3034, 4343}
2014/07/25 New STIC Lockout Control Limit Switch Now Used on Certain R2900G and R3000H Load Haul Dump Machines {1435, 3034, 4343}
2014/10/01 A New Alternator Group Is Now Used on Certain Low Altitude 793D Off-Highway Truck Engines {1405, 1408}
794 AC Off-Highway Truck Hydraulic Oil Filter - Replace - Brake, Steering, Fan, and Hoist
16M Series 3 and 18M Series 3 Motor Grader Electronic Control (Hydraulic System)
Bench Test Procedure for a 980L, 980M, and 982M Wheel Loader Transmission {3030, 3073} Bench Test Procedure for a 980L, 980M, and 982M Wheel Loader Transmission {3030, 3073}
Repair Procedure For The 16M Motor Grader Front Frame and Centershift Bracket{7050} Repair Procedure For The 16M Motor Grader Front Frame and Centershift Bracket{7050}
735C, 740C EJECTOR and 745C Articulated Trucks Indicator Lamp - Test
980M and 982M Medium Wheel Loaders Connector Contact Description
794 AC Off-Highway Truck Piston Motor (Blower Fan) - Inspect/Lubricate
980M and 982M Medium Wheel Loaders Torque Converter
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Location of Components (Brake System)
794 AC Off-Highway Truck Rear Suspension Link - Inspect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Drift - Check