C7 Engine for Caterpillar Built Machine Caterpillar


Fan Drive - Disassemble

Usage:

MH3037 KPM

拆解步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     1P-0510     冲头总成     1    

开始:

  1. 拆下风扇驱动。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g03656018

  1. 拆下螺栓 (2 ) 。

  1. 将轴组件 (1) 从风扇驱动装置支架 (3) 上拆下。



    图 2g03656166



    图 3g03656580

  1. 将螺栓 (7) 和板 (8) 从轴 (4) 上拆下。

  1. 将轴组件放置到适当的压具中。 如有必要,使用工具 (A) 或适当的压具,将轴 (4) 从挡圈 (5) 和轴承 (6) 上拆下。

Caterpillar Information System:

Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051} Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051}
Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604} Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604}
586C Site Prep Tractor Machine Systems Lift Cylinder
Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F}
914G2 and IT14G2 Compact Wheel Loaders Engine Crankcase Breather - Clean
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Compartment Shield
825K Soil Compactor Specifications
428D and 432D Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 428D and 432D Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Rotary Actuator
2014/03/31 New Procedure for Decision Support Is Now Available for Cat® MineStar Fleet Office v4.0 {7605}
794 AC Off-Highway Truck Fan - Inspect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Control Manifold (Brake, Pilot, Fan)
986K Wheel Loader Systems Circuit Breakers
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector
586C LRC Site Prep Tractor Seat Belt - 4-Point Harness
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G System Schematic
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electrohydraulic Control
824K Wheel Dozer Specifications
735C, 740C EJECTOR and 745C Articulated Trucks Connector Contact Description
950M, 962M, 950M Z and 962M Z Wheel Loaders Loader Frame to Rear Frame - Connect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Oil Coolers and Cooling System Operation
730C2 and 725C2 Articulated Truck Power Train Transmission and Torque Converter Oil Filter - Remove and Install
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.