914G2 and IT14G2 Compact Wheel Loaders Caterpillar

Illustration 1	g02746218

Open the engine access door on the back side of the machine. Use the prop rod to hold the engine access door open.

Illustration 2	g00395077

The breather is located under the breather cover (1).

1. Remove the 14 screws (2) that hold the cover.
   Show/hide table

   Illustration 3	g00417498
   Expanded view of the engine crankcase breather

2. Check the condition of the cover seal. If the used seal is damaged, replace the seal with a new seal.

3. Wash the element in a clean, nonflammable solvent. Wash the breather element cover assembly in a clean, nonflammable solvent.

4. Shake the element in order to dry the element. Pressure air may also be used to dry the element.

5. Inspect the breather hose for damage. Replace the breather hose, if necessary.

6. Install the breather element. Install the breather element cover assembly.

7. Install the breather hose and breather outlet hose clamp.

8. Close the engine access door.