Lift Cylinder
Show/hide table
 | |
| Illustration 1 | g02628016 |
Show/hide table
 | |
| Illustration 2 | g03655968 |
Torque sequence | |
Show/hide table
| Specification for the 434-0544 Lift Cylinder Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | - | 434-0544 Lift Cylinder Gp | Operating pressure .......... 24132 kPa (3500 psi) |
| Note: Lube the rod threads, nut, piston, and rod surface with clean hydraulic oil before assembly. | |||
| 1 | 1 | Bore | Bore diameter of the cylinder .......... 101.6 mm (4.00 inch) |
| 2 | 1 | Rod | Diameter of the rod .......... 63.5 mm (2.50 inch) |
| 3 | 1 | Nut | Torque for the nut .......... 2034 N·m (1500 lb ft) |
| 4 | 12 | Bolts | Clean and lube the bolt threads and the underside of the bolt head with anti-seize. |
| Torque for the bolts .......... 43 N·m (32 lb ft) |
|||
| Note: Follow the torque sequence that is shown in Illustration 2. | |||
Caterpillar Information System:
Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F}
914G2 and IT14G2 Compact Wheel Loaders Engine Crankcase Breather - Clean
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Engine Compartment Shield
825K Soil Compactor Specifications
428D and 432D Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 428D and 432D Backhoe Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Rotary Actuator
2014/03/31 New Procedure for Decision Support Is Now Available for Cat® MineStar Fleet Office v4.0 {7605}
794 AC Off-Highway Truck Fan - Inspect
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement)
966M and 972M Wheel Loaders Diesel Exhaust Fluid - Fill
C3.3B Engines for Caterpillar Built Machines Finding Top Center Position for No. 4 Piston
826K Landfill Compactor Specifications
Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604} Rework Procedure to Replace the Idler Assembly on Certain PM-200 Cold Planer{4159, 5604}
Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051} Backhoe Loaders Fitted with 2-Way Auxiliary Hydraulic Systems May Have Handle and Gate Mounted Incorrectly{5051}
C7 Engine for Caterpillar Built Machine Fan Drive - Disassemble
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Control Manifold (Brake, Pilot, Fan)
986K Wheel Loader Systems Circuit Breakers
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector
586C LRC Site Prep Tractor Seat Belt - 4-Point Harness
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G System Schematic
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Electrohydraulic Control
824K Wheel Dozer Specifications
735C, 740C EJECTOR and 745C Articulated Trucks Connector Contact Description
950M, 962M, 950M Z and 962M Z Wheel Loaders Loader Frame to Rear Frame - Connect