Module - Flash Program
Show/hide table
| |
| Illustration 1 | g02615483 |
|
Components of the Communication Adapter 3 Gp (317-7484) are listed: (1) Current version of Cat® Electronic Technician (Cat ET) Service Tool software for use with a Windows-based personal computer (2) 317-7485 Control Gp-Electronic (Com Adapter 3) (3) 327-8981 Cable As. (Data Link Cable CA3) (4) 370-4617 Cable As. (CA3 PC USB Cable) | |
Perform the following procedure to flash program an ECM. An ECM is flashed to upgrade the software. An ECM must also be flashed if an ECM has been replaced. The Cat® Electronic Technician (Cat ET) Service Tool contains the program WinFlash. WinFlash is used to load software into an ECM.
- Connect the data link cable between the communication adapter and Cat ET.
- Connect the data link cable between the communication adapter and the diagnostic connector of the machine.
- Turn the disconnect switch and the key start switch to the ON position.
- Set the implement lockout to the LOCKED position.
- Make sure that the transmission direction switch is in the neutral position.
- Verify that the engine is not running.
- Use WinFlash to load the software.
Caterpillar Information System:
D6T Track-Type Tractor Engine Supplement Engine Oil Pump - Remove and Install
349F and 352F Excavators Machine System Specifications Track Adjuster
D6T Track-Type Tractor Engine Supplement Engine Oil Pan - Remove and Install
D6T Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
D6T Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
994K Wheel Loader Lifting and Tying Down the Machine
424B and 424B HD Backhoe Loaders Power Train Front Axle - Assemble
994K Wheel Loader Fuel System Water Separator - Check/Drain
C3.4B Engines Glow Plug Starting Aid - Test
XQ125 Generator Set Fan Clearance - Check
424B and 424B HD Backhoe Loaders Power Train Front Axle - Disassemble
424B Backhoe Loader Power Train Final Drive Planetary - Install
Cat® Terrain for Drilling Health Events
D6T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Sensor Signal (PWM) - Test
Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202} Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202}
586C Site Prep Tractor Machine Systems Piston Pump (Work Tool) - Attachment Pump
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540} Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540}
Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540} Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540}
586C Site Prep Tractor Machine Systems Winch
994K Wheel Loader Fuel System Water Separator - Replace
The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056} The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056}
994K Wheel Loader Fuel System - Prime