349F and 352F Excavators Machine System Specifications Caterpillar


Track Adjuster

Usage:

352F-VG A9J


Illustration 1g03482659

Table 1
Item  Qty  Part  Specification Description 
Prior to assembly into the track roller frame, this surface must be clean and free of protective coating. 
Fill the relief holes with the 5P-0960 Grease Cartridge. 
Lubricate the inside diameter of the cylinder and the seal grooves in the cylinder with the 5P-0960 Grease Cartridge. 
2S-5926 Relief Valve  Torque to 34 ± 5 N·m (25 ± 4 lb ft)
357-7540 Fill Valve  Torque to 34 ± 5 N·m (25 ± 4 lb ft)
093-1437 Lip Type Seal  Installation depth is 0.5 ± 0.5 mm (0.02 ± 0.02 inch)
297-9157 Piston  Lubricate the outside diameter of the piston and the seal grooves in the piston with the 5P-0960 Grease Cartridge. 

Caterpillar Information System:

D6T Track-Type Tractor Engine Supplement Engine Oil Pan - Remove and Install
D6T Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
D6T Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
994K Wheel Loader Lifting and Tying Down the Machine
424B and 424B HD Backhoe Loaders Power Train Front Axle - Assemble
994K Wheel Loader Fuel System Water Separator - Check/Drain
C3.4B Engines Glow Plug Starting Aid - Test
XQ125 Generator Set Fan Clearance - Check
424B and 424B HD Backhoe Loaders Power Train Front Axle - Disassemble
424B Backhoe Loader Power Train Final Drive Planetary - Install
Rework Procedure to Update AP1000E and BG1000E Asphalt Pavers with 35KW Hydraulic Generator Group{4450} Rework Procedure to Update AP1000E and BG1000E Asphalt Pavers with 35KW Hydraulic Generator Group{4450}
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0562 - FMI 14
D6T Track-Type Tractor Engine Supplement Engine Oil Pump - Remove and Install
D6T Track-Type Tractor Monitoring System Module - Flash Program
Cat® Terrain for Drilling Health Events
D6T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Sensor Signal (PWM) - Test
Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202} Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202}
586C Site Prep Tractor Machine Systems Piston Pump (Work Tool) - Attachment Pump
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540} Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540}
Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540} Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540}
586C Site Prep Tractor Machine Systems Winch
994K Wheel Loader Fuel System Water Separator - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.