Engine Oil Pan - Remove and Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | − | Loctite 587 | − |
开始:
- 拆下底部护罩。
- 有关排放和加注步骤,请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
- 打开左侧发动机舱门,拆下侧护罩。
Show/hide table
图 1 g03609766 - 拆下夹子 (2),拆下接头螺母 (3),并将油位表组件 (1) 置于一旁。 废弃接头螺母 (3)。
Show/hide table
图 2 g03609779 - 断开夹子 (4) 并重新放置软管 (5)。
Show/hide table
图 3 g03609776 注: 不要撬动或凿打发动机油底壳的密封表面。 必要时,利用橡皮锤轻轻敲打发动机油底壳。
- 拆下螺栓 (6)。 拆下发动机油底壳 (7) 和垫片。
- 按与拆卸相反的顺序安装发动机油底壳 (7)。
- 工具 (A) 应该涂抹在位置 (X) 处,涂抹宽度为
4.00 ± 1.00 mm (0.158 ± 0.040 inch) 。 将工具 (A) 涂抹到接头处。 涂抹工具 (A) 后 10 分钟内应安装发动机油底壳 (7)。Show/hide table图 5 g02143244 发动机俯视图
发动机油底壳的拧紧顺序 - 按照图 5 中所示的顺序拧紧螺栓 (6)。
- 将接头螺母 (3) 拧紧在油位表组件 (1) 中,直到套筒分离并牢固地连接到管上。
Show/hide table图 4 g02142246 - 工具 (A) 应该涂抹在位置 (X) 处,涂抹宽度为
Caterpillar Information System:
D6T Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
D6T Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
994K Wheel Loader Lifting and Tying Down the Machine
424B and 424B HD Backhoe Loaders Power Train Front Axle - Assemble
994K Wheel Loader Fuel System Water Separator - Check/Drain
C3.4B Engines Glow Plug Starting Aid - Test
XQ125 Generator Set Fan Clearance - Check
424B and 424B HD Backhoe Loaders Power Train Front Axle - Disassemble
424B Backhoe Loader Power Train Final Drive Planetary - Install
Rework Procedure to Update AP1000E and BG1000E Asphalt Pavers with 35KW Hydraulic Generator Group{4450} Rework Procedure to Update AP1000E and BG1000E Asphalt Pavers with 35KW Hydraulic Generator Group{4450}
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0562 - FMI 14
R2900G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0562 - FMI 09
349F and 352F Excavators Machine System Specifications Track Adjuster
D6T Track-Type Tractor Engine Supplement Engine Oil Pump - Remove and Install
D6T Track-Type Tractor Monitoring System Module - Flash Program
Cat® Terrain for Drilling Health Events
D6T Track-Type Tractor Engine Supplement Water Pump - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Sensor Signal (PWM) - Test
Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202} Crankshaft Rework Procedure for Certain 3508 Off-Highway Truck Engines{1202}
586C Site Prep Tractor Machine Systems Piston Pump (Work Tool) - Attachment Pump
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540} Procedure to Install the Lincoln Auto Lubrication System on Certain 777G Off-Highway Trucks{7516, 7540}
Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540} Procedure to Update a 777G Off-Highway Truck for a Groeneveld or Lincoln Auto Lubrication Installation {0679, 1408, 7253, 7516, 7540}
586C Site Prep Tractor Machine Systems Winch