12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Caterpillar


Menus

Usage:

12M 3 AWD N9B


Illustration 1g03602147


Illustration 2g06211011

Table 1
Motor Grader Hierarchical Menu Structure 
Settings  Display  Day/Night Mode   
Settings  Display  Language   
Settings  Display  Units   
Settings  Display  Bklight Day   
Settings  Display  Bklight Night Contrast   
Settings  Transmission  Initial Fwd Gear   
Settings  Transmission  Initial Rear Gear   
Settings  Transmission  Min Fwd Autoshift Gear   
Settings  Transmission  Min Rev Autoshift Gear   
Settings  Engine  Fuel Economy Mode   
Settings  Engine  Compression Brake   
Settings  Implement  Modulation Config   
Settings  Implement  Aux Pod Enable Status   
Settings  Implement  Ripper Autostow Status   
Totals  Lifetime  Operating Hrs   
Totals  Lifetime  Fuel Used   
Totals  Lifetime  Forward Dist   
Totals  Lifetime  Reverse Dist   
Totals  Trip  Operating Hrs   
Totals  Trip  Fuel Used   
Service  Configuration  Fuel Economy   
Service  Configuration  Compression Brake   
Service  Diagnostics     
Service  Calibration  Transmission  Transmission Fill 
Service  Service Test  Dead Engine Steering   
Service  ECM Summary  Engine   
Service  ECM Summary  Aftertreatment   
Service  ECM Summary  Transmission   
Service  ECM Summary  Implement   
Service  ECM Summary  Implement 2   
Service  ECM Summary  Implement 3   
Service  ECM Summary  AWD   
Service  ECM Summary  Product Link   
Service  ECM Summary  Display   
Machine Status  Machine  Starter Relay   
Machine Status  Machine  Operator In Seat Sensor   
Machine Status  Machine  Operator Present Status   
Machine Status  Machine  Differential Lock Sw   
Machine Status  Machine  A/C Operator Sw   
Machine Status  Machine  A/C Refrigerant Circuit Stat   
Machine Status  Machine  A/C Compress Clutch Relay   
Machine Status  Machine  Alternator Status   
Machine Status  Machine  Backup Alarm   
Machine Status  Machine  Heated Side Window Sw   
Machine Status  Machine  Heated Mirror Sw   
Machine Status  Machine  Seat Belt Sw   
Machine Status  Machine  Service Brake Pedal Pos   
Machine Status  Machine  Fuel Level   
Machine Status  Machine  Eco Mode   
Machine Status  Machine  Compression Brake   
Machine Status  Engine  Eng Spd   
Machine Status  Engine  Desired Eng Spd   
Machine Status  Engine  Eng Oil Press   
Machine Status  Engine  Eng Coolant Temp   
Machine Status  Engine  Fuel Press   
Machine Status  Engine  Boost Press   
Machine Status  Engine  Load Factor   
Machine Status  Engine  Fuel Rate   
Machine Status  Engine  DEF Tank Level   
Machine Status  Engine  DEF Tank Temp   
Machine Status  Engine  Regen Status   
Machine Status  Engine  Regen Disable   
Machine Status  Engine  DPF Temp   
Machine Status  Engine  ARD Fuel Press   
Machine Status  Engine  Air Filter Restriction   
Machine Status  Engine  Throttle Position   
Machine Status  Engine  Fuel Level   
Machine Status  Engine  Fuel Temp   
Machine Status  Engine  Fuel Filter Used   
Machine Status  Engine  Air Intake Temp   
Machine Status  Engine  Intake Manifold Press   
Machine Status  Engine  Barometric Press   
Machine Status  Engine  Throttle Lock Mode   
Machine Status  Engine  Throttle Lock Sw   
Machine Status  Engine  Throttle Set/Accel Sw   
Machine Status  Engine  Throttle Resume/Decel Sw   
Machine Status  Transmission  Actual Gear   
Machine Status  Transmission  Desired Gear   
Machine Status  Transmission  Direction Switch   
Machine Status  Transmission  Autoshift Switch   
Machine Status  Transmission  Inching Pedal Pos   
Machine Status  Transmission  Inching Pedal Switch   
Machine Status  Transmission  Trans Oil Temp   
Machine Status  Transmission  Trans Oil Fltr Bypass Sw   
Machine Status  Transmission  Trans Input Spd   
Machine Status  Transmission  Trans Intermediate Spd 1   
Machine Status  Transmission  Trans Intermediate Spd 2   
Machine Status  Transmission  Trans Intermediate Spd 3   
Machine Status  Transmission  Trans Output Spd 1   
Machine Status  Transmission  Trans Output Spd 2   
Machine Status  Transmission  Up Shift Switch   
Machine Status  Transmission  Down Shift Switch   
Machine Status  Transmission  Trans Sol 1   
Machine Status  Transmission  Trans Sol 2   
Machine Status  Transmission  Trans Sol 3   
Machine Status  Transmission  Trans Sol 4   
Machine Status  Transmission  Trans Sol 5   
Machine Status  Transmission  Trans Sol 6   
Machine Status  Transmission  Trans Sol 7   
Machine Status  Transmission  Trans Sol 8   
Machine Status  Transmission  Trans Oil Type   
Machine Status  Implement  Hyd Pump Press 1   
Machine Status  Implement  Hyd Oil Temp   
Machine Status  Implement  Hyd Pilot Fltr Bp Sw   
Machine Status  Implement  Hyd Ret Oil Fltr Bp Sw   
Machine Status  Implement  Impl Lockout Sw   
Machine Status  Implement  Impl Pilot Supply Sol   
Machine Status  Implement  Blade L Lift Lever Pos   
Machine Status  Implement  Blade L Raise Sol   
Machine Status  Implement  Blade L Lower Sol   
Machine Status  Implement  Blade L Cyl Float Stat   
Machine Status  Implement  Blade R Lift Lever Pos   
Machine Status  Implement  Blade R Raise Sol   
Machine Status  Implement  Blade R Lower Sol   
Machine Status  Implement  Blade R Cyl Float Stat   
Machine Status  Implement  Wheel Lean L Button   
Machine Status  Implement  Wheel Lean L Sol   
Machine Status  Implement  Wheel Lean R Button   
Machine Status  Implement  Wheel Lean R Sol   
Machine Status  Implement  Blade Pitch Fwd Button   
Machine Status  Implement  Blade Pitch Fwd Sol   
Machine Status  Implement  Blade Pitch Bckwd Button   
Machine Status  Implement  Blade Pitch Bckwd Sol   
Machine Status  Implement  Blade Sideshift Lever Pos   
Machine Status  Implement  Blade Sideshift L Sol   
Machine Status  Implement  Blade Sideshift R Sol   
Machine Status  Implement  Centershift L Button   
Machine Status  Implement  Centershift R Button   
Machine Status  Implement  Centershift L Sol   
Machine Status  Implement  Centershift R Sol   
Machine Status  Implement  Circle Drive Lever Pos   
Machine Status  Implement  Circle Left Sol   
Machine Status  Implement  Circle Right Sol   
Machine Status  Steering  Steer Ctrl Pos   
Machine Status  Steering  Steer Ctrl Pos 1   
Machine Status  Steering  Steer Ctrl Pos 2   
Machine Status  Steering  Steer Ctrl Pos 3   
Machine Status  Steering  Right Steer Cyl Pos   
Machine Status  Steering  Left Steer Cyl Pos   
Machine Status  Steering  Hyd Pump Press 1   
Machine Status  Steering  Hyd Pump Press 2   
Machine Status  Steering  Left Pri Steer Sol   
Machine Status  Steering  Right Pri Steer Sol   
Machine Status  Steering  Pri Steer Disable Sol   
Machine Status  Steering  Pri Steer Valve Spool   
Machine Status  Steering  Hyd Oil Type   
Machine Status  Steering  Steer Oil Temp   
Machine Status  Steering  Secondary Steer L Sol   
Machine Status  Steering  Secondary Steer R Sol   
Machine Status  Steering  Secondary Steer Stat   
Machine Status  Steering  Secondary Steer Relay   
Machine Status  Steering  Sec Steer Test Sw   
Machine Status  Steering  Sec Steer Test Status   
Machine Status  Steering  Articulation Lever Pos   
Machine Status  Steering  Auto Neutral Artic Sw   
Machine Status  Steering  Articulation Left Sol   
Machine Status  Steering  Articulation Right Sol   
Machine Status  Steering  Articulation Ang Sens1   
Machine Status  Steering  Articulation Ang Sens2   
Machine Status  Brake  Park Brake Press   
Machine Status  Brake  Park Brake Status   
Machine Status  Brake  Park Brake Sw   
Machine Status  Brake  Park Brake Sol   
Machine Status  Brake  Brake Chrg Pres 1   
Machine Status  Brake  Brake Chrg Pres 2   
Machine Status  Brake  Brake Chrg Sol   
Machine Status  Brake  Service Brake Pedal Pos   
Machine Status  AWD  AWD Mode   
Machine Status  AWD  AWD Sw   
Machine Status  AWD  AWD Dial Pos   
Machine Status  AWD  Desired Left Front Spd Ratio   
Machine Status  AWD  Left Front Spd Ratio   
Machine Status  AWD  Desired Right Front Spd Ratio   
Machine Status  AWD  Right Front Spd Ratio   
Machine Status  AWD  Left Front Drive Motor Sol   
Machine Status  AWD  Left Front Pump Fwd Sol   
Machine Status  AWD  Left Front Pump Rev Sol   
Machine Status  AWD  Right Front Drive Motor Sol   
Machine Status  AWD  Right Front Pump Fwd Sol   
Machine Status  AWD  Right Front Pump Rev Sol   
Machine Status  AWD  Left Front Clutch Fwd Sol   
Machine Status  AWD  Left Front Clutch Rev Sol   
Machine Status  AWD  Right Front Clutch Fwd Sol   
Machine Status  AWD  Right Front Clutch Rev Sol   
Machine Status  AWD  Left Front Spd 1   
Machine Status  AWD  Left Front Spd 2   
Machine Status  AWD  Right Front Spd 1   
Machine Status  AWD  Right Front Spd 2   
Operator  Select     
Operator  Edit     
Operator  Create     
Operator  Delete     

Caterpillar Information System:

980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
Product Link 121S/300 Electronic Service Tool Does Not Communicate with ECM
Product Link 121S/300 Diagnostic Capabilities
416F2, 420F2 and 430F2 Backhoe Loaders Fuel Tank Water and Sediment - Drain
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Display Module
2014/01/31 A Procedure Is Available to Avoid Temperature Fault Codes on the AP300 Asphalt Paver {7620}
416F2, 420F2 and 430F2 Backhoe Loaders Engine Oil and Filter - Change
415F2 Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
Product Link 121S/300 Service Tools
Product Link 121S/300 General Information
140 Motor Graders Service Brake
Product Link 121S/300 Commands
Product Link 121S/300 Position Reports Not Available
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Settings Menu
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Totals Menu
Product Link 121S/300 Reporting Interval Erratic
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Service Menu
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Machine Status Menu
2014/02/20 The Power Train Wiring Group Has Been Improved on 793F Off-Highway Trucks {1408}
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Operator Menu
2014/02/03 New Clamps Improve the Air Lines Group on 770 and 772 Off-Highway Trucks {1071, 1071}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Magnetic Screen - Clean
Product Link 121S/300 Diagnostics and Events Not Available
Product Link 121S/300 Operating Hours Discrepancy
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.