Totals Menu
Show/hide table
| |
| Illustration 1 | g03614321 |
Show/hide table
| |
| Illustration 2 | g03614378 |
The "Totals" menu option is selected by using the four-way button until the "Totals" menu is displayed and then pressing the "OK" button.
The "Totals" menu allows the operator to access two lists of data: Lifetime Totals and Trip Totals. This information can be used to determine when service work needs to be performed.
The information that is listed in the Lifetime menu can only be viewed. You cannot change the information that is displayed.
The information that is listed in the Trip menu can be reset.
Show/hide table
| |
| Illustration 3 | g03614857 |
Show/hide table
| |
| Illustration 4 | g03614878 |
Caterpillar Information System:
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Settings Menu
Product Link 121S/300 Position Reports Not Available
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Menus
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
Product Link 121S/300 Electronic Service Tool Does Not Communicate with ECM
Product Link 121S/300 Diagnostic Capabilities
416F2, 420F2 and 430F2 Backhoe Loaders Fuel Tank Water and Sediment - Drain
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Display Module
2014/01/31 A Procedure Is Available to Avoid Temperature Fault Codes on the AP300 Asphalt Paver {7620}
416F2, 420F2 and 430F2 Backhoe Loaders Engine Oil and Filter - Change
415F2 Backhoe Loader Stopping the Engine if an Electrical Malfunction Occurs
Product Link 121S/300 Service Tools
Product Link 121S/300 Reporting Interval Erratic
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Service Menu
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Machine Status Menu
2014/02/20 The Power Train Wiring Group Has Been Improved on 793F Off-Highway Trucks {1408}
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Operator Menu
2014/02/03 New Clamps Improve the Air Lines Group on 770 and 772 Off-Highway Trucks {1071, 1071}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Magnetic Screen - Clean
Product Link 121S/300 Diagnostics and Events Not Available
Product Link 121S/300 Operating Hours Discrepancy
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Oil - Change
Procedure to Properly Connect and Disconnect the High-Voltage Connectors on "F" Series Asphalt Pavers {1408} Procedure to Properly Connect and Disconnect the High-Voltage Connectors on "F" Series Asphalt Pavers {1408}
Product Link 121S/300 Event Code List