Machine Status Menu
Show/hide table
Illustration 1 | g03618497 |
The "Machine Status" menu option is selected by using the four-way button until the "Machine Status" menu is displayed and then pressing the "OK" button.
The following options are available through the "Machine Status" menu:
- Machine
- Engine
- Transmission
- Implement
- Steering
- Brake
- AWD
Show/hide table
Illustration 2 | g06210758 |
Show/hide table
Illustration 3 | g03615376 |
Show/hide table
Illustration 4 | g03615417 |
Show/hide table
Illustration 5 | g03615477 |
Show/hide table
Illustration 6 | g03615523 |
Show/hide table
Illustration 7 | g03615557 |
Show/hide table
Illustration 8 | g03615598 |
Caterpillar Information System:
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Service Menu
Product Link 121S/300 Reporting Interval Erratic
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Totals Menu
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Settings Menu
Product Link 121S/300 Position Reports Not Available
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Menus
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Torque Converter Stall and Implement Pump Double Stall - Test
Product Link 121S/300 Electronic Service Tool Does Not Communicate with ECM
Product Link 121S/300 Diagnostic Capabilities
416F2, 420F2 and 430F2 Backhoe Loaders Fuel Tank Water and Sediment - Drain
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Display Module
2014/01/31 A Procedure Is Available to Avoid Temperature Fault Codes on the AP300 Asphalt Paver {7620}
2014/02/20 The Power Train Wiring Group Has Been Improved on 793F Off-Highway Trucks {1408}
12M Series 3, 140M Series 3, and 160M Series 3 Motor Graders Monitoring System Operator Menu
2014/02/03 New Clamps Improve the Air Lines Group on 770 and 772 Off-Highway Trucks {1071, 1071}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Magnetic Screen - Clean
Product Link 121S/300 Diagnostics and Events Not Available
Product Link 121S/300 Operating Hours Discrepancy
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Oil - Change
Procedure to Properly Connect and Disconnect the High-Voltage Connectors on "F" Series Asphalt Pavers {1408} Procedure to Properly Connect and Disconnect the High-Voltage Connectors on "F" Series Asphalt Pavers {1408}
Product Link 121S/300 Event Code List
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Oil Filter - Replace
Product Link 121S/300 Diagnostic Code List
Product Link 121S/300 MID 122 - CID 0168 - FMI 00